2015 Jeep Wrangler Oscar Mike Edition on 2040-cars

Auto blog

JL Jeep Wrangler experiencing death wobble, NHTSA checking into it

The redesigned 2018 JL Jeep Wrangler is selling remarkably well, but it looks like it's still susceptible to age-old Jeep solid front axle vehicle issues. Recently, the NHTSA has received 11 JL Wrangler-specific complaints for a problem referred to as "death wobble" in the Jeep community. It's currently looking into the complaints to see if further action is necessary. Death wobble is a term used predominantly by Jeep and specifically Wrangler owners to describe a violent steering wheel oscillation, typically caused by hitting some form of bump or pothole at higher speeds. For it to occur, there has to be something loose or damaged within the front steering or suspension system. The death wobble gets its name, because the vibrations through the steering wheel are far more frightening than any kind of a wheel imbalance problem. However, using the word "death" would be a misnomer as well, because there are no reported deaths due to the issue over decades of Jeeps experiencing the issue. A little over a month ago, FCA decided it needed to recall 18,000 JL Wranglers because of a faulty weld around where the track bar is welded to the frame. As of now, there's no evidence linking this faulty weld with death wobble (an FCA spokesperson told us as much), but one of the most common causes of death wobble is a track bar issue. If a bad track bar weld is your problem, you're in far worse shape than any death wobble, because you'll end up with a complete loss of steering. We asked Jeep about death wobble and a company spokesperson said that it "is not a widespread condition, nor is it a safety issue." FCA also said most of the incidents are linked to poorly installed suspension modifications, such as a lift-kit. However, the most current complaints for JL Wranglers describe unmodified and recently purchased vehicles. This means some vehicles still experience the issue despite being stock Wranglers. For now, if you experience the death wobble in your new Jeep, it's best to slow down immediately in a safe place. Most are taken by surprise by the sudden oscillations from the wheel, but you should still be able to control the car. FCA says that even if you do experience the issue, it is routinely corrected on its own. We'll keep tabs on this, and update if there are any developments. Related video:

Chrysler's Jefferson North plant builds 5-millionth SUV [w/video]

Chrysler's Jefferson North Assembly Plant opened in 1992 for production of the first Jeep Grand Cherokee, but in the subsequent years, the Detroit plant has gone on to produce some of the company's biggest SUVs including the Jeep Commander and Dodge Durango. Earlier this week, the plant produced its five-millionth SUV, which, fittingly, was a Grand Cherokee.
Celebrating the plant's five-millionth unit, the silver 2014 Grand Cherokee was promptly donated to the USO. In addition to this milestone SUV, Chrysler also had a near-perfect 1993-95 ZJ Grand Cherokee on hand for the photo op. Scroll down for the Chrysler press release as well as a video showing some of the speeches from the celebration.

Jeep reveals annual Moab Easter Jeep Safari concepts

Jeep has unveiled its annual spate of concepts before the Easter Jeep Safari. Those start with the Grand Cherokee Trailhawk Concept (below left), complete with the company's EcoDiesel V6 engine. Designers threw in a set of 35-inch Mickey Thompson tires wrapped around 17-inch Rubicon wheels, and a set of custom fender flares help keep all that rubber under wraps.
Meanwhile, the Wrangler Mopar Recon (below right) packs a 6.4-liter Hemi V8 good for 470 horsepower. All that grunt gets to the ground via a five-speed automatic transmission and a set of a Dana 60 axles frond and rear with 4.10 gears. The Recon also makes use of a 4.5-inch prototype long-arm kit and a set of prototype eight-lug bead lock wheels.
The Wrangler Stitch (below left) builds on the momentum of the Wrangler Pork Chop Concept. Engineers once again set out to strike as much weight as possible from the vehicle, and actually managed to trim the curb weight down to 3,000 pounds. That effort has given the machine the same power to weight ratio as the Grand Cherokee SRT8. Plenty of carbon fiber, door deletes and a chrome moly roll cage all help trim those pounds, and a set of DanyTrac Pro Rock 44 axles with 4.88 gears and ARB lockers front and rear let this machine scramble over whatever is in its path.