2014 Jeep Wrangler Unlimited Sahara on 2040-cars

Auto blog

Chrysler recalling over 200k vehicles across its brands

With more than 200,000 units across six separate recalls and almost all of its brands, it appears that Chrysler has officially jumped headfirst into the recall pool this month. The National Highway Traffic Safety Administration has issued three official recalls for the automaker, and The Detroit News is reporting that the automaker itself has announced three more.
The biggest of the recalls applies to about 120,000 Dodge Charger, Dodge Challenger and Chrysler 300 models for 2011 and 2012 due to faulty wiring harnesses for the seat-mounted side airbags, which could lead to these airbags not deploying in the event of a crash. A little more than 60,000 two-wheel-drive versions of the 2007-2008 Dodge Nitro and 2008 Jeep Liberty SUVs are being recalled due to a heat shield that could cause the driveshaft to break, which if that isn't bad on its own, could then hit underneath where the airbag sensor is mounted, causing the airbags to deploy. Wrapping up NHTSA's recall notices, about 20,000 Jeep Patriot and Jeep Compass models for 2012 are also being recalled due to a problem with the fuel tank transfer tube that could lead to the vehicle stalling. The LX car recall campaign is going into effect this month, while the other two will start next month - all three notices are posted below.
In addition to the official NHTSA recalls, The Detroit News is also reporting that Chrysler is recalling more than 16,000 Ram trucks and a small number of Dodge Dart sedans. Around 6,500 2013 Ram 1500 trucks will be recalled due to an improper adjustment of the parking brake cable from the factory, while 7,000 Cummins-powered 2013 Ram Heavy Duty trucks are being recalled due to an engine cover that does not have as much heat resistance as it is supposed to. Finally, a total of 46 Dodge Dart sedans are being recalled due to a problem with the brake calipers and/or parking brake.

Hybrid and Electric Jeeps, Fiats, and Alfa Romeos to be built in Poland

WARSAW - Fiat Chrysler will invest more than $200 million in its plant in Tychy in Poland, where new hybrid and electric Jeep, Fiat and Alfa Romeo models will be built, Deputy Prime Minister Jaroslaw Gowin said on Tuesday. The investment comes as a boost to emerging Europe's largest economy, which is hoping a switch to electric vehicles can help its auto sector catch up with regional rivals including the Czech Republic and Slovakia. "Modern, hybrid and electric cars of the Jeep, Fiat and Alfa Romeo brands will start to leave the factory in Tychy in 2022," Gowin wrote on Twitter. Gowin said there could be further investment in the plant in future but gave no details. Fiat Chrysler, which is planning a $38 billion merger with French rival PSA to create the world's No.4 carmaker, said in a statement that early preparations for the expansion and modernization of the plant started in late 2020. The plant in Poland's industrial southern region of Silesia is one of the company's largest and currently employs around 2,500 people. Fiat Chrysler confirmed that new hybrid and electric Jeep, Fiat and Alfa Romeo models would be built in Tychy. It said the aim was to start mass production of the first of the three new passenger car models for the group's brands in the second half of 2022. Under a 2018-2022 plan, FCA pledged to invest 9 billion euros in electrification as part of investment plans totaling 45 billion euros. (Reporting by Alan Charlish and Agnieszka Barteczko in Warsaw, Silvia Recchimuzzi in Gdansk; editing by Jason Neely and Susan Fenton) Auto News Government/Legal Green Plants/Manufacturing Alfa Romeo Fiat Jeep Green Automakers Electric Future Vehicles Hybrid

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.