2014 Jeep Wrangler Unlimited Sahara on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Dodge revamping lineup with AWD Challenger and lighter Charger

Dodge's current lineup is aging rapidly. The Charger, for example, is going on 5 years old but its platform dates back to 2006. FCA, according to Automotive News, is working on revitalizing Dodge's lineup with the first of some new models debuting later this year. The report reveals plans for the majority of FCA's brands, but the most interesting bit of information is an all-wheel-drive model for the Dodge Challenger, which is being referred to as the GT AWD. Mopar unveiled the Challenger GT AWD Concept at SEMA last year as a concept, but it looks like the idea stuck. The vehicle is set to make its debut this fall and will lead the way for a wide-body, Hellcat-powered version that will be released in 2017. That model will be called the Challenger ADR. The entire Challenger lineup will be redesigned in 2018, which includes switching over to the lighter Giorgio platform - the same one that underpins the Alfa Romeo Guilia Dodge will also redesign the Charger to accommodate the new Giorgio platform in 2018. A new two-door convertible could debut in 2021, resurrecting the Barracuda moniker. The aging Dodge Durango will get a light refresh in 2017 with the addition of an SRT model, which Automotive News reports will feature a 6.4-liter V8 engine. Other changes are in store for other FCA brands, including the debut of full-size crossover in 2018 for Chrysler, which will be followed by a midsize crossover in 2019. The Jeep Compass and Wrangler will get a redesign for 2017, with the Cherokee getting a light makeover, as well. The Wrangler-based pickup truck, which we recently spotted testing, is set for its debut in 2018, while the Wagoneer will come out a year later. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

FCA to recall 318,000 vehicles for faulty backup camera software

An array of 2019 and 2020 FCA vehicles are being recalled over faulty backup camera software that doesn’t meet federal regulations. According to recall documents, the backup camera may not turn off “until a drive cycle ends.” ThatÂ’s far longer than the 10-second linger time allowed by the rules, so FCA has to recall all of the vehicles to implement a fix. WeÂ’ve listed all of the vehicles involved below. 2020 Jeep Gladiator 2020 Jeep Cherokee 2019-2020 Ram 1500 2019-2020 Ram 2500  2019-2020 Ram 3500 2019-2020 Chrysler Pacifica 2019-2020 Dodge Durango 2019-2020 Jeep Grand Cherokee 2019-2020 Jeep Wrangler 2019-2020 Jeep Renegade 2019 Dodge Challenger ItÂ’s an extensive list encompassing a huge chunk of FCAÂ’s lineup in the United States. In total, FCA is recalling 318,537 vehicles. They must be equipped with the 8.4-inch or 12-inch infotainment system for the problem to present itself. FCA expects the recall to start on May 22 this year and will begin to notify owners soon. To fix the vehicles that may be affected, FCA plans to update the infotainment system at the dealer or over-the-air. If youÂ’ve noticed a screen thatÂ’s sluggish to relinquish its hold on the backup camera feed (or maybe never does), then you have this recall to look forward to. Update: FCA has provided additional information about the repair methodology. Customers will be able to receive an update over the air or have their cars updated at the dealership. Customers will begin receiving notifications this month. Related video: Recalls Chrysler Dodge Jeep Crossover Minivan/Van SUV