2006 Jeep Wrangler Rubicon 4x4 10k Miles Many Upgrades Winch +++ on 2040-cars

Auto blog

STLA Medium EV platform claims long range, up to 382 horsepower

We don’t get to see it paired with a car yet, but Stellantis just revealed a bunch of details about its upcoming STLA Medium electric vehicle platform. As a reminder, this is just one of four that will ultimately come out, including STLA Small, Medium, Large and Frame. The "Medium" is specifically designated for vehicles in the C and D segments, but Stellantis isnÂ’t explicitly saying which new models will sit on it. At the very least, Stellantis is providing a boatload of specs to chew on. Maximum range for vehicles on the STLA Medium platform is said to be 435 miles when paired with a "Performance" pack and tested on the WLTP cycle. The "Standard" pack brings that max range down to 310 miles. Of course, expect those numbers to nosedive when tested on the EPA cycle. All those miles come courtesy of a 98-kilowatt-hour battery pack, which is the highest-range Performance pack. Stellantis hasnÂ’t said what the standard pack capacity will be quite yet. As for charging, all STLA Medium vehicles will feature a 400-volt electric architecture that will be able to facilitate charging from 20-80% in 27 minutes. A maximum charge speed is not yet specified. Stellantis also claims an astoundingly efficient 4.43 miles per kWh, "depending on the application." Basically, donÂ’t expect all of the STLA Medium vehicles to touch that level of efficiency, but some might for WLTP testing. As for driving enjoyment, you can expect power output to range between 215-382 horsepower. STLA Medium cars will be available with either front-wheel drive or all-wheel drive and come in body styles including "passenger cars, crossovers and SUVs." The platform allows for some flexibility in size, so wheelbase can range from 106-114 inches. Overall length will vary from 169-193 inches, and ground clearance maxes out at 8.66 inches, for those curious about how Jeep models might fare on this platform. Stellantis says itÂ’s going to deliver "best-in-class battery packaging cost," explaining that despite various total energy options, the perimeter dimensions of the battery pack, common tray and cooling designs will remain constant.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Fiat Chrysler and Peugeot boards meet to finalize merger

MILAN/PARIS — The boards of Fiat Chrysler Automobiles and Peugeot will meet separately on Tuesday to discuss finalizing an initial agreement for a $50 billion merger to create the world's number four carmaker, sources said. A source close to FCA said the two companies could announce the signing of a binding memorandum early on Wednesday, followed by a conference call to explain further details later in the day. The two mid-sized carmakers announced plans six weeks ago for a tie-up to help them deal with big challenges in the industry, including a global demand downturn and the need to develop costly cleaner cars to meet looming anti-pollution rules. Ahead of the meetings, entities representing the Peugeot family, Etablissements Peugeot Freres (EPF) and FFP, unanimously approved a proposed memorandum of understanding for the planned merger, a source familiar with the situation said. FCA and PSA have said they would seek to finalize a deal by year-end to create a group with 8.7 million in annual vehicle sales. That would put it fourth globally behind Volkswagen, Toyota and the Renault-Nissan alliance. PSA's Carlos Tavares will be chief executive and FCA's John Elkann — the scion of Italy's Agnelli family, which controls FCA through their holding company Exor — chairman of the combined company. The group will include the Fiat, Jeep, Dodge, Ram, Chrysler, Alfa Romeo, Maserati, Peugeot, DS, Opel and Vauxhall brands, allowing it to serve mass and premium passenger car markets as well as those for trucks and light commercial vehicles. Related Video:       Chrysler Dodge Fiat Jeep RAM Citroen Peugeot