1995 Jeep Wrangler S on 2040-cars

Auto blog

Jeep delivers basketful of concepts for the Moab Easter Jeep Safari

It's Easter time, and that means it's time for the 52nd Annual Moab Easter Jeep Safari, held March 24 through April 1, where thousands of off-roaders crawl, scrape and scramble over the rugged trails of Moab, Utah. And that brings us to this year's colorful collection of Jeep concepts, custom-built by FCA for the occasion. Jeep Wagoneer Roadtrip View 7 Photos This year there are seven Easter treats — including one called Wagoneer and one called Jeepster. All are decked out in Mopar parts. (Mopar already has 200-plus parts and counting for the all-new 2018 Jeep Wrangler.) Here then, is this year's Easter pageant of Jeeps: Jeep 4SPEED This year's lightweight concept is meant to bolster off-road performance through extensive weight savings. It's powered by the all-new 2.0-liter turbocharged I-4 engine with an eight-speed automatic. Carbon fiber abounds — the stuff is used for the hood, fender flares and the rear tub, which also features aluminum perforated panels. It gets an "aggressively swept back" look via raked windshield, longer door openings and a custom cage. It's also 22 inches shorter with improved approach and departure angles, though the wheelbase remains unchanged. And it gets Dana 44 front and rear axles with a 4.10 gear ratio and 18-inch lightweight monoblock wheels with 35-inch tires. Inside, there's a custom instrument panel, custom seats and deleted back seats. Footwells are perforated aluminum. The 4SPEED is so much lighter than stock, it rides two inches higher. Jeep Sandstorm This one's inspired by Baja desert racers but can still be used as a daily driver. It gets an extreme-duty suspension system capable of both tasks. The front axle has been moved forward four inches and takes a heavy-duty longarm four-link suspension and track bar. The rear axle has been moved back two inches and gets a triangulated trailing arm four-link suspension. The longer wheelbase provides better high-speed stability. The front wheels — 39.5-inch tires on 17-inch beadlock wheels — get custom coilovers and bypass shocks that allow 14 inches of travel in front and 18 in back. It gets Baja styling cues such as a vented carbon fiber hood, vented high-clearance fender flares and a cage with lay-down spare tire carrier. There are no exterior door handles, and the rear doors have been chopped.

Jeep Grand Cherokee, Dodge Durango still catching fire after recall

Automakers issue recalls all the time. It's part of the cost of doing business. We just assume that once the recall has been carried out, the problem in question has been fixed. But that's not always the case, as this latest investigation being undertaken by the National Highway Traffic Safety Administration goes to show. The problem stems back to a recall issued by Chrysler last summer. It revolved rather the sun visor in the SUVs it makes at its Jefferson North Assembly Plant – specifically, the screw affixing the sun visor could end up rubbing against the wiring for the lamp in the vanity mirror, potentially causing an electrical short and even a fire. 62 such short circuits, 38 fires and three injuries reported, prompting Chrysler to recall nearly 900,000 units of the 2011-2014 Jeep Grand Cherokee and Dodge Durango (over 650,000 of them in the United States). The plastic spacers they installed to rectify the problem, however, may not have done the trick. Eight reports (but none involving injuries) have been filed with the NHTSA regarding the same issue recurring, spurring the government agency to open a new investigation into the matter. If deemed necessary, the NHTSA could ask FCA to issue another recall to fix the issue again, which we may necessitate the installation of a fuze to prevent any such the electric short. Related Video: INVESTIGATION Subject : Headliner Fires Date Investigation Opened: MAY 01, 2015 Date Investigation Closed: Open NHTSA Action Number: RQ15003 Component(s): ELECTRICAL SYSTEM , INTERIOR LIGHTING Manufacturer: Chrysler (FCA US LLC) SUMMARY: On July 1st, 2014 Chrysler (FCA US LLC) issued safety recall 14V-391 to remedy a wiring-related fire hazard on the headliner of approximately 661,888 model year (MY) 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured between January 5, 2010 and December 11, 2013. The recall was in response to the Office of Defects Investigation (ODI) investigation EA14-001 during which data provided by Chrysler indicates that the fire is caused by an electrical short in the vanity lamp wiring for either one of the sun visors mounted on the vehicle. The sun visors are mounted to the roof of the vehicle through the headliner with three metal screws.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.