2023 Jeep Wagoneer Series Iii on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.

U.S. asks Mexico to probe whether Stellantis parts plant abused labor rights

MEXICO CITY and WASHINGTON — The United States has asked Mexico to probe alleged worker rights violations at an auto-parts plant owned by Italian-French carmaker Stellantis, the fourth such complaint under a revised trade deal, U.S. officials said on Monday. The U.S. request for Mexico to examine possible abuses at Teksid Hierro de Mexico in the northern border state of Coahuila comes under the 2020 United States-Mexico-Canada Agreement (USMCA). Teksid, which employs nearly 1,500 people and makes iron castings for heavy vehicles, has been embroiled in a union dispute since 2014. Workers say the company has blocked them from being represented by the group of their choice, the Miners Union, and that it dismissed workers who backed the group. The U.S. Trade Representative's (USTR) office said in the request it was concerned workers had been denied collective bargaining rights in connection with an "invalid" contract with the Confederation of Mexican Workers (CTM), one of Mexico's most powerful unions, that had been registered with state authorities. The office asked Mexico to investigate if efforts had been made, including threats and incentives, to encourage backing for CTM or to dissuade support for the Miners Union. Labor disputes in Mexico have long featured intimidation tactics by powerful unions cozier with employers and governments than workers. Under the USMCA, the trade pact that replaced NAFTA, factories that violate worker rights could lose their tariff-free status. Companies have been watching how the tougher labor rules will play out. Stellantis, the world's fourth-largest auto group which formed from the merger of Peugeot maker PSA and Fiat Chrysler, said it "respects and supports the collective bargaining rights of its employees around the world and will comply with all local laws in that regard." The United Auto Workers union, which represents U.S. Stellantis workers, along with the AFL-CIO labor federation and the Miners Union, flagged the potential violations, the USTR's office said. Teksid, CTM and the local Conciliation and Arbitration Board should be included in the review, it added. CTM did not immediately respond to a request for comment. The union's leader in Coahuila, Tereso Medina, recently told Mexican newspaper El Economista the union would abide by the USMCA and that the conflict should be resolved with a workers' vote. Mexico's federal labor center in May said the Miners Union held the only valid contract.