1989 Jeep 4x4, Converted To 4 Dr Truck, Partial Soft Top, 33inch Wheels on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

Chrysler recalls small number of 2013-2014 cars and trucks over engine debris

Chrysler is recalling a small number cars over issues with their 2.4-liter four-cylinder engines. The recall, which affects 522 examples of its 2013 Dodge Avenger and Chrysler 200 models, as well as 2014 Jeep Compass and Patriot CUVs has to do with potential debris in the balance shaft bearings.
The abrasive stuff can cause the oil pressure to drop, which could lead to the engine stalling or outright failure. This situation could at best leave drivers stranded and at worst lead to a crash.
Chrysler will begin notifying owners, who will need to report in to have the balance shaft module replaced. All repairs are naturally free of charge. Scroll down for the bulletin from NHTSA.

Build your own: 2017 Jeep Wrangler Willys Wheeler

While still three weeks from the start of summer, it arrived in practical terms with the Memorial Day weekend. And while the country will have worked through its collective hangover (from too much food, drink and shopping) and gotten back to work, it's worth remembering what – automotively – got us here, preserving both democracy and personal freedoms. The CJ-inspired Jeep Wrangler got us here, and in its Willys Wheeler guise the spirit of America rolls on. As the many spy pics have shown, FCA's Jeep division is working hard to replace its current Wrangler within the next few months. With that, we say goodbye to 10 model years of Wrangling with the current model. And that decade has been a good one for Jeep. Despite the economic downturn between 2008 and 2010, Jeep and Jeep Wrangler sales have been consistent bright spots for FCA, along with – of course – Ram trucks and, uh, Ram trucks. With a new Wrangler around the bend, it's worth taking a look at the existing model. And knowing an all-new example is coming, what would be the reason – if shopping – to consider what's on dealer lots now? Despite the numerous areas of improvement the new model will deliver (in efficiency, refinement and safety) , there's something to be said for a vehicle 10 years into its production cycle. While this is wholly anecdotal, for every step forward a manufacturer makes with a new vehicle, the added tech and necessary complexity seem to mandate two steps back. In an Audi A4, tech would seem a good thing, while in a Wrangler, this Jeep enthusiast would see it as a mixed blessing. Almost 80 years into its evolution (the initial Jeep concept came together in the summer of 1940) little has changed in the Jeep's essential mission. A body-on-frame architecture transports a driver and up to three passengers over paved and unpaved surfaces with credible confidence and a modicum of security. Live axles front and rear enhance the Wrangler's off-road capability, but compromise its on-road behavior. And while a significantly wider track mitigates rollovers, the Wrangler is decades removed from "state-of-the-art" when discussing safety or handling. Currently there's but one engine available in the States, a 3.6 liter normally-aspirated V6 producing 285 horsepower at a you'll-rarely-get-there 6,400 rpm. Connected to either a six-speed manual or ($1,400) five-speed automatic, the engine moves the 4,000-pound (loaded) Wrangler with measured confidence.