2005 Jeep Liberty Limited! 3.7l V6, Leather, Sunroof, Rust-free, Clean Carfax! on 2040-cars

Auto blog

Some Jeep Cherokees and Chrysler 200s to get standard stop-start in 2015

Automakers the world over are striving to find ways to make their models more efficient, and Chrysler has a solution for some versions of the 2015 Chrysler 200 and 2015 Jeep Cherokee (2014 model shown). The Tigershark 2.4-liter four-cylinder in the 200 and the 3.2-liter Pentastar V6 in the Cherokee are getting a slight boost later this year thanks to the addition of Chrysler's Engine Stop-Start system as standard equipment. The company predicts modest gains - a three-percent improvement in fuel economy and a three percent reduction in CO2 emissions with the new tech compared to without it. While it's not much, those who sit in traffic a lot may see a difference.
Chrysler's stop/start system uses a high-speed starter motor to restart the vehicle in a claimed a third of a second. It works by detecting when the vehicle comes to a stop and turning off the engine. A more powerful battery maintains all of the model's accessories while it sits. When the driver lets off the brake, the car starts up again to drive away. There is even a button in the cabin to turn the ESS off, if desired.
The Jeep will be the first to receive ESS in the third quarter of this year to coincide with the start of production of the 2015 model-year version. The 200 will follow in the fourth quarter as a rolling change in production.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

2019 Jeep Renegade reveals front fascia details

Over the past few months, details of the new 2019 Jeep Renegade subcompact crossover SUV have been trickling out via spy shots. This latest batch show that the front fascia, specifically the front bumper, is getting a number of subtle changes. Among the more noticeable tweaks are the new side vents in the bumper. They've been given a triangular design. Besides offering a nice chunky look, they also encompass the turn signals. This is a cleaner, better integrated look than the current model, which just leaves those indicators in their own little spots in the bumper. The foglights have changed, too. They're now significantly larger, and sit farther inboard in the main grille in the bumper. Moving up in the fascia, we see that the Renegade is getting some new headlights. At least on this model, there's an LED daytime running light halo in the headlamps. It also has a horizontal insert that appears to house an LED headlight element just like that on the new Wrangler. We've seen other prototypes with conventional halogen reflector headlights like on the current model, and we expect they will continue to be used on lower-spec models. There aren't many other changes to see. The rear of the truck looks roughly the same, as do the flanks. From past prototypes, we know that it will continue to have a massive touchscreen option for the infotainment. There also may be a hybrid model. It could be a very mild electric-assist like that on the four-cylinder Wrangler and the V8 and V6 Ram 1500s, or it could be something more. We expect to see the new Renegade revealed by the end of the year at the earliest, and certainly by the end of the next auto show season. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2019 Jeep Renegade Spy Shots View 9 Photos Image Credit: KGP Photography Spy Photos Jeep Crossover SUV Off-Road Vehicles jeep renegade