2005 Green Limited! on 2040-cars

Auto blog

Dodge, Jeep, Ram showcasing electric wares over the next four months

Mopar Insiders took notes on Stellantis' half-year earnings call. Seems three of the eight Stellantis brands operating in the U.S. will be making big announcements about coming electric offerings in the next few months. Dodge is up first. We've been writing about the house of the muscle car trying to put on an extra special show during its Speed Week in Detroit in August, the span between Roadkill Nights and the Woodward Dream Cruise. Seems that's confirmed with the presentation of a "Gateway" muscle car and a "Future" muscle car. The former is expected happen on August 16 and be the Hornet PHEV, Dodge's version of the Alfa Romeo Tonale PHEV. The plug-in hybrid Tonale Q4 uses the powertrain from the Euro-market Jeep Compass 4xe, but gets a larger battery pack and produces a total 275 hp. We're looking forward to finding out if brand overlords decided the Dodge should have more, less, or the same output as the Alfa, and the same battery pack or the smaller Compass pack. The latter "Future" vehicle is expected to bow the day after. This would be a concept version of the Challenge e-muscle car that we've been salivating over for too long. Given two of Stellantis' most powerful motors slotted into the STLA Large platform, output north of 800 horses seems to be the consensus. The production version isn't slated for sale until the end of 2023, so the model on showroom floors will likely differ slightly from what we see next week. It's Jeep's turn in September, the off-road brand shining light on the plug-in hybrid options headed to showroom floors here. That should mean news on the Renegade 4xe and Compass 4xe anticipated in the U.S. in 2024, and a Gladiator 4xe the year after. Wagoneer and Cherokee electrification plans could be on the docket, too, as well as plans for wider global distribution of the Jeepster we've seen in Europe.  Finally, two months later, Ram takes the stage for updates on its electric Revolution. So far, that entails the Ram Promaster BEV, a van likely to combine years of experience from the Fiat Ducato Electric and the Peugeot E-Boxer that have been serving fleets in Europe. MI thinks November topics will include a 79-kWh battery, four drive modes, and the chance of the ProMaster getting a side door for delivery fleets like Amazon. Of course, the electric Ram pickup is the meat enthusiasts will have their forks out for.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

NHTSA investigating why Jeep recall fix is taking so long

Jeep's saga with the National Traffic Safety Administration and the voluntary campaign to repair 1.56 million vehicles for allegedly unsafe trailer hitches, is getting yet another chapter. The controversy appeared to finally be over in January when the automaker found a supplier for the replacement parts. Nothing is ever that easy, though, and the government regulator is now requesting documents from the company to clarify why the repairs are taking so long to begin.
Jeep parent company Chrysler has until July 16 to submit documents and answers to NHTSA explaining the situation. The regulator claims that despite its compromise to inspect and repair the models with improper hitches in June 2013, Chrysler didn't find a part supplier until December and didn't order the replacements until January. The government agency believes that the first components weren't manufactured until May of this year and vehicles may not actually be repaired until as late as August. According to the report, if the Chrysler doesn't supply what NHTSA is asking for, the agency could "take additional appropriate action as warranted."
Throughout this entire process, Chrysler has asserted that the vehicles met the applicable crash test standards of the time, and it has kept NHTSA abreast of the repair activity. In a recently released statement it said that the regulator analyzed eight rear impact reconstruction tests and found the replacement hitch to be safe. To keep up with the high demand for replacements, Chrysler is working with multiple suppliers, and they are running three shifts, six days a week to get the parts ready as soon as possible.