2004 Jeep Liberty Sport on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Project Trail Force Jeep Wrangler goes to SEMA, then to a lucky winner

Extreme Terrain is an aftermarket parts company focused on the Jeep Wrangler. Partly just because it's a really cool thing to do, and probably having something to do with Jeep's upcoming 75th anniversary, Extreme Terrain found some dance partners to help work up a special 2015 Wrangler Rubicon that it will show off at the Bantam Jeep Heritage Festival in Butler, PA, then at SEMA in November, where it will be given away. Extreme worked with Barricade Off-Road and Kevin Tetz from the Spike show Trucks! to build the Wrangler it calls Project Trail Force. There is more than $24,000 worth of aftermarket gear on it, starting with the Ripp centrifugal supercharger that pumps an additional 140 horsepower into the 3.6-liter V6. It's got a 3.5-inch lift kit from Rock Krawler, Dana 44 axles strung between 37-inch BFG tires, Barricade bumpers, a 9,500-pound winch, fender flares, rock sliders, a 50-inch LED light bar above the windshield, LED spotlights on the A-pillars, and seven-inch KC Hilites headlights. Rugged Ridge worked over the inside with upgrades like all-terrain floor and cargo liners, plus seat covers, and a new navigation system with a back-up camera. If you want to win it, you can enter the contest at Extreme Terrain once every week until Oct. 23. The winner gets flown to SEMA to have Kevin Tetz hand the keys over. If you just want to see it, you can head to PA for that heritage festival. The Project Trail Force will also lead a Jeep parade that could set a Guinness World Record. The press release below has a lot more info on the build. Good luck. EXTREMETERRAIN AND BARRICADE OFF-ROAD TO UNVEIL THEIR FULLY-BUILT 2015 JEEP WRANGLER AT BANTAM JEEP FESTIVAL ExtremeTerrain.com and Barricade Off-Road teamed up to build a $73,000+ 2015 Jeep Wrangler Rubicon to be given away to a lucky winner at the 2015 SEMA Show • Giveaway Link: http://www.extremeterrain.com/jeep-wrangler-project-trailforce-giveaway.html • Video: https://www.youtube.com/watch?v=jsO6fxVq6kI MALVERN, Pa. (June 12, 2015) – ExtremeTerrain, a leader in providing aftermarket Jeep Wrangler parts, along with rugged, enthusiast-driven Jeep Wrangler aftermarket armor and accessories manufacturer Barricade Off-Road, today unveiled a fully-built 2015 Jeep Wrangler Rubicon dubbed Project Trail Force at the Bantam Jeep Heritage Festival in Butler, PA.

Jeep's Wrangler Hellcat and six other sweet concepts for Moab

Jeep. Wrangler. Hellcat. You read that correctly. And while it's just a concept for this year's Moab Easter Jeep Safari, it has us dreaming about blasting through the desert at 200 miles per hour. Fiat Chrysler Automobiles released a whole slew of Easter Jeep concepts at an event at the company's Auburn Hills, MI, headquarters today. The 50th annual Moab Safari will take place in just a couple of weeks – it's a sort of mecca for Jeep owners, and for the past few years, FCA brings its concepts out to the rocks and trails of Moab to prove that these are more than mere one-off, delicate showcars. Our own Brandon Turkus was live at FCA's reveal event, and he passed along a bunch of notes, in addition to the official stuff from Jeep. Here are some details about each concept, with full photo galleries and videos of each Jeep creation.