2019 Jeep Grand Cherokee on 2040-cars

Auto blog

Airbag fault on 1M recalled Jeeps getting second look from NHTSA [UPDATE]

UPDATE: Here is the statement we received from Chrysler regarding NHTSA's query: "Chrysler Group LLC advised the National Highway Traffic Administration of the six reports and, in accordance with the Company's long-standing practice, is cooperating fully with the resulting investigation. Customer safety is paramount at Chrysler Group. Customers who are concerned may call 1-800-853-1403."
It appears that Jeep's repairs for nearly one million Grand Cherokees from 2002-2004 and Liberty models from 2002-2003 might not be over yet. The vehicles were first recalled in November 2012 because the front airbags could suddenly deploy without being in an accident. Now, the National Highway Traffic Safety Administration is opening a recall query into them because of reports of inadvertent activation on some already corrected vehicles.
The original problem affected over 919,000 vehicles worldwide, including 744,822 in the US, and was caused by a degrading circuit in the wires that control the airbags. In some cases the airbag warning light would come on just before the premature activation, but in other cases it would just happen. The automaker installed an "in-line jumper harness with an integrated electrical filter" meant to eliminate the power spikes believed to be the cause.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.

Jeep Wagoneer, Grand Wagoneer, and pickup confirmed for production, all built in the US

Jeep has confirmed some much-anticipated future models: a new Wagoneer and Grand Wagoneer as well as a pickup truck, which we expect to be based on the Wrangler. FCA has also announced where these new vehicles be produced, the investment involved, and that adding the models will create 2,000 American jobs. The Wagoneers will be built at FCA's Warren Truck Assembly Plant in Michigan, which currently produces the Ram 1500. The overhaul required to add the Jeeps will also set the plant up to build Ram Heavy Duty models, which are currently made in Mexico. (It's not clear whether this would be additional Heavy Duty capacity or a complete move of production of those trucks to the US.) The confirmed Jeep pickup will be built at the Toledo Assembly Complex in Ohio as expected. This is the same plant that builds Wranglers today and will produce the new JL Wrangler that the pickup version is expected to use. View 30 Photos All of these factory upgrades are part of a $1 billion investment by FCA. The retooling is scheduled to be completed by 2020, which means these models are likely to come online for the 2021 model year, which jibes with the rumors that the Wagoneers have been delayed. That the large Jeeps will be built at the plant that currently produces Ram 1500s also leads us to believe that they will in fact use a version of the Ram truck platform instead of being built off the Grand Cherokee platform as originally planned. The timing of this announcement and its mention of Mexico and US jobs may have something to do with recent talk from President-elect Trump about US auto industry jobs and possible tariffs to be imposed on vehicles built across the border. Marchionne says these plans have been in discussion "for some time" but it's not clear what that timeframe was. Trump has targeted Ford, General Motors, and Toyota in recent tweets but has stayed quiet on FCA. While the announcement may have been political in nature, Jeep fans will no doubt welcome the news of the returning nameplates and the long-awaited pickup model. Related Video: Featured Gallery 2019 Jeep Grand Wagoneer Dealer Leak Spy Shots Jeep Crossover SUV Luxury Off-Road Vehicles jeep wrangler pickup