2014 Limited New 3.6l V6 24v 4wd Suv on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

SUV lifts you up where you belong and leapfrogs traffic jams

So, you're at a dead stop, stuck in traffic, when it pulls up behind you. It appears to be a garden-variety Jeep Grand Cherokee. That is, until its undercarriage lifts the Jeep 9 feet into the air, and the whole rig straddles you and the cars ahead of you in a bid for open road. The car is called the Hum Rider, and no, you can't buy one at the Jeep store. It's a one-off publicity stunt intended to promote Verizon Telematic's Hum platform, which plugs into a car's OBD port and for $10 a month provides vehicle diagnostics, roadside assistance, location tracking, and speed and geo-fencing alerts. (Not sure if Hum tracks vertical leaps.) Verizon enlisted viral marketing agency Thinkmodo to promote the Hum, and this idea was head and shoulders above the rest. "We saw this one [and said], 'Wow, that is crazy,' said Jay Jaffin, Verizon's VP of marketing. "We loved the idea." Thinkmodo co-founder James Percelay told Mashable that they wanted to represent the upgrade Hum brings to cars. So the car goes up. Get it? Here's the star of this story: Hum Rider's designer, Scott Beverly, has done visual effects for Hollywood in The Dark Knight, Inception and Interstellar. He works for A2Zf, a Lancaster, Calif., design and engineering firm that keeps the world filled with Batmobiles, Red Bull Can Cars and beautifully designed VWs and Audis. A2Zf has also worked with NASA on X-planes and with Northrup on the B2 bomber, so compared to those projects, a car-straddling car is hardly a stretch. So what does it take to make a car do this? How about: Over 300 feet of hydraulic lines that operate everything - the lift mechanism, steering, braking and power to the drivetrain. A gas-powered Honda generator under the hood that powers hydraulic pumps pushing out 900 pounds of pressure. A lot of mechanical structure. Hum Rider weighs 8,500 pounds, almost double a standard Grand Cherokee. Heavy-duty truck tires to support all that weight. Four undercarriage cameras that allow the driver to see and clear what's beneath him. What did it cost? They're not saying. What would it be worth, the next time you're stuck in traffic? Priceless.

Baby Jeep to join Renegade in FCA's plan for new Italian-built models

FCA is boosting its European production, introducing new models that will be built in currently under-utilized manufacturing facilities. Among the new models is a new small Jeep, smaller than the current Renegade, as Automotive News reports. FCA's Mike Manley mentioned the entry-level Jeep model earlier this year, also saying that the vehicle is targeted to European and possibly Latin American customers; in the summer, Autocar placed the launch date in 2022. The new "baby" Jeep would be made in the same factory in Pomigliano, Italy, as the small Fiat Panda, which is a top seller in Italy. The current generation Panda was introduced in 2011; if it gets a replacement in 2022, it could possibly share a platform with the Jeep model — or, the Jeep could be an eventual outright replacement for the Panda. One of Fiat's earlier core products, the Punto hatchback, was canned in August, and that production capacity will be used to make the Jeep Compass instead, at the Renegade-producing Melfi factory in southern Italy. The Compass has not previously been built in Europe. The Fiat model portfolio would be shrunk to just the 500 model family and the Panda — the 500 would also be FCA's key electric vehicle offered in Europe. It is not yet clear whether the electric 500 would be made in Turin, Italy, or in Poland; Turin might also get a Giardiniera-badged wagon version of the refreshed 500. As for the Alfa Romeo brand, it is set to gain an even bigger SUV model than the Stelvio, based on the Maserati Levante's platform. The Levante's sales have suffered recently in China, but Maserati does have light in the horizon: The Alfieri 2+2 grand tourer is still in the cards, with a launch expected for 2020 and both a convertible and an electrified version planned to follow. The Alfieri would be made in Modena, Italy, according to Automotive News' sources. None of these plans namedrop the storied Lancia brand, which has been shrunk to just the Ypsilon hatchback, based on the same platform as the current 500 and Panda. Despite that, the Ypsilon was again the second-bestselling car in Italy after the Panda in October. It is unlikely that FCA will be able to ignore this, but it is just as unlikely that any development money will be afforded to come up with a replacement for the Ypsilon, which is as similarly old as the Panda. Perhaps official announcements expected on Thursday will also clarify what will happen to Lancia.