2014 Jeep Grand Cherokee Limited on 2040-cars

Auto blog

Here's what it'll take to build a Jeep Grand Cherokee Hellcat

Let's get one thing straight: We want a 707-horsepower Grand Cherokee Hellcat to happen. Badly. The latest report from Motor Authority is encouraging; the bonkers SUV supposedly has a codename, Project K, and has been given the green light for production. Fingers crossed. You might be wondering why the Trackhawk isn't already a thing. Hellcat engines exist, SRT Grand Cherokees exist, so just combine the two, right? It's not quite that easy. Here, we outline what needs to happen, why it should be the quickest Hellcat vehicle out there, and why it won't come anywhere near 200 miles per hour. How To Build A Hellcat Jeep The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged V8. The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged Hellcat V8. Breathing is important on two counts: pulling in enough air for the combustion to put out 707 hp, and then cooling the various heat exchangers once the engine is up to temperature. Dodge did it with the Charger and Challenger, it can do it with the Jeep. This is one place where the Grand Cherokee's larger frontal area might be a boon, as it gives the engineers more surfaces through which to suck air. Once you generate the 707 horsepower and 650 pound-feet of torque, it has to get to the wheels somehow. Jeep's current SRT all-wheel-drive system will at least need some beefing up to handle the torque. It could require a more complete re-engineering. We at least know the ZF-supplied eight-speed auto, used in the Dodge Hellcat models, is up to the task. The Hellcat engine should fit in the Grand Cherokee, as it's about the same size as the 6.4-liter currently in SRT Jeeps, but the Hellcat is taller because of its supercharger. The hood may need to be raised or at least resculpted for clearance, as well as to address those cooling needs. Quicker Than Everything, But Not Faster 200 mph? We're skeptical, from both a physics standpoint and a legal one. A reminder of the quick/fast distinction: quick is acceleration, fast is road speed. The Jeep's all-wheel drive will help put the Hellcat engine's power to the ground in a more manageable way than the Charger and Challenger do through just the rear wheels. That means better acceleration times than the Dodges (11.0 seconds in the quarter-mile for the Charger Hellcat, 11.2 for its Challenger sibling).

Submit your questions for Autoblog Podcast #319 LIVE!

We record Autoblog Podcast #319 tonight, and you can drop us your questions and comments regarding the rest of the week's news via our Q&A module below. Subscribe to the Autoblog Podcast in iTunes if you haven't already done so, and if you want to take it all in live, tune in to our UStream (audio only) channel at 10:00 PM Eastern tonight.
Discussion Topics for Autoblog Podcast Episode #319
Jeep checks out the Grand Wagoneer at Wagonmaster

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums