2008 Jeep Grand Cherokee Limited-- "4wd"-- "v8"-- "hemi"-- "navigation"-- "leat on 2040-cars

Auto blog

Jeep Wrangler pickup's rear suspension is inspired by Ram

Although we've learned about all there is to know about the new Jeep Wrangler, there is still more to discover about its upcoming truck sibling, such as the rear suspension. We knew it would be coil-sprung, but these new spy shots also indicate that the suspension is more similar to what's under a Ram 1500 than the Wrangler SUV. In the gallery above, the first two images compare the rear suspension of a new-generation 2018 Wrangler (left) and the Wrangler pickup (right). Immediately obvious is that the shocks on the Wrangler SUV are mounted at the back of the axle, while the truck's shocks are mounted at the front. It's also possible to see that the anti-roll bar on the SUV is mounted quite high up, while the truck's bar sits much lower, near the base of the rear axle. The third image shows a Ram 1500 on the left and the Wrangler pickup on the right. Here we can see that the Ram shares the same sort of low-mounted anti-roll bars and forward-mounted shocks, along with a Panhard rod. The two aren't quite the same, though. For one thing, the Wrangler pickup's rear axle looks more like the Wrangler SUV's than the one on the Ram. It's possible that these suspension changes were made in an effort to boost the Wrangler truck's payload capabilities. It's also possible that there are some handling quirks to the long truck body style for which a Ram-style suspension was better suited. We'll look forward to learning more about the differences when the truck is revealed, likely in early 2019. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2018 Jeep Wrangler Spied Looking More Aerodynamic | Autoblog Minute

This week we got an early look at the 2018 Jeep Wrangler. So what we see in these spy shots, or at least we think we see, is a vehicle that?s going to use more aluminum in a bid to reduce weight and thus improve fuel economy.

Here's what it'll take to build a Jeep Grand Cherokee Hellcat

Let's get one thing straight: We want a 707-horsepower Grand Cherokee Hellcat to happen. Badly. The latest report from Motor Authority is encouraging; the bonkers SUV supposedly has a codename, Project K, and has been given the green light for production. Fingers crossed. You might be wondering why the Trackhawk isn't already a thing. Hellcat engines exist, SRT Grand Cherokees exist, so just combine the two, right? It's not quite that easy. Here, we outline what needs to happen, why it should be the quickest Hellcat vehicle out there, and why it won't come anywhere near 200 miles per hour. How To Build A Hellcat Jeep The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged V8. The first engineering problem is feeding the air-intensive beast that is the 6.2-liter supercharged Hellcat V8. Breathing is important on two counts: pulling in enough air for the combustion to put out 707 hp, and then cooling the various heat exchangers once the engine is up to temperature. Dodge did it with the Charger and Challenger, it can do it with the Jeep. This is one place where the Grand Cherokee's larger frontal area might be a boon, as it gives the engineers more surfaces through which to suck air. Once you generate the 707 horsepower and 650 pound-feet of torque, it has to get to the wheels somehow. Jeep's current SRT all-wheel-drive system will at least need some beefing up to handle the torque. It could require a more complete re-engineering. We at least know the ZF-supplied eight-speed auto, used in the Dodge Hellcat models, is up to the task. The Hellcat engine should fit in the Grand Cherokee, as it's about the same size as the 6.4-liter currently in SRT Jeeps, but the Hellcat is taller because of its supercharger. The hood may need to be raised or at least resculpted for clearance, as well as to address those cooling needs. Quicker Than Everything, But Not Faster 200 mph? We're skeptical, from both a physics standpoint and a legal one. A reminder of the quick/fast distinction: quick is acceleration, fast is road speed. The Jeep's all-wheel drive will help put the Hellcat engine's power to the ground in a more manageable way than the Charger and Challenger do through just the rear wheels. That means better acceleration times than the Dodges (11.0 seconds in the quarter-mile for the Charger Hellcat, 11.2 for its Challenger sibling).