1996 Jeep Grand Cherokee Limited on 2040-cars

Auto blog

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights

Buy this instead of a Wrangler | 2017 Jeep Grand Cherokee Trailhawk Review

In our first encounter with the 2017 Jeep Grand Cherokee Trailhawk at Fiat Chrysler's Chelsea Proving Grounds, we saluted the new model's impressive on-road demeanor. In its off-road mode, however, we couldn't ignore the pre-production throttle calibration – it was super sharp and difficult to modulate with the precision needed to navigate obstacles. We were told then that Jeep's engineers were aware of the problem and were fixing it for production models. So we recently set off for Bundy Hill Off-Road Park in Jerome, Michigan, in a production-spec Grand Cherokee Trailhawk to check their work and get a better idea of the overall package. We can report that the Trailhawk's throttle has been fixed for production, landing it properly in Goldilocks territory. In the off-road Mud setting, the throttle is soft and easy to modulate. You can balance this rig with the gas pedal, reaching just past tip-in to steadily prod forward. But the gas pedal doesn't delay when you really need power. Move beyond the initial tip-in, and the engine responds quickly, which is a good thing, as a sluggish throttle is almost as dangerous off-road as one that's too sharp. Rock mode promises even more precise control over the throttle, although our lack of a spotter and a desire to avoid damaging the 700-mile-young Trailhawk kept us from hitting Bundy Hill's rockier sections. The wet, non-snowy weather meant we didn't properly test Snow or Sand mode. This test model was equipped with FCA's popular 3.6-liter V6, but like the rest of the Grand Cherokee range, more power is available from the 3.0-liter EcoDiesel V6 and the 5.7-liter Hemi V8. You don't need them – the 3.6-liter and eight-speed automatic are perfectly fine on the trails. Faced with an incline, the transmission holds its gear without complaint – you don't even need to switch into manual mode. Despite the 4,800-rpm torque peak, the V6's 260 pound-feet arrive early enough that you don't need to strong-arm the throttle. So that's resolution for the pre-production issue. But our time at Bundy Hill exposed a different and ultimately much easier to fix problem for the production model. Late fall in Michigan is not always a good time to go off-road – sub-40-degree temperatures and a steady, depressing drizzle can turn a relatively simple trail into a slippery mess of wet clay. Conditions like these can easily overwhelm an on-road tire like the Goodyear All-Terrain Adventures the Trailhawk uses.

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.