09 Grand Cherokee Srt8-45k-4wd-nav-srt Option Group Ii-tinted Windows-customized on 2040-cars

Auto blog

FCA recalls 570,000 SUVs from Jeep and Dodge over fire woes

Fiat Chrysler US has issued two recalls covering a total of about 570,000 Jeep and Dodge models. The first concerns vanity mirror wiring in the Jeep Grand Cherokee from the 2011 and 2012 model years, and in Dodge Durango units built before September 12, 2012. The automaker recalled almost 900,000 units last year to repair the issue, then faced more issues this year when the fires continued in repaired vehicles. This new recall seeks to resolve the issue, FCA saying that the post-recall fires happened in a tiny percentage of vehicles equipped with a specific wiring package. This recall is for 352,831 total units in the US, another 26,478 in Canada, 13,037 in Mexico, and 84,330 internationally. No injuries or deaths have been reported. FCA says it will inform customers as to when they can schedule a service visit to remedy the issue. The second recall takes aim at 60,107 examples of the Jeep Compass and Patriot from the 2015 model year in the US, plus 5,755 in Canada, 3,351 in Mexico, and 23,995 in other markets. Those models could suffer from an out-of-position clamp on the power steering fluid line. The error could allow fluid to leak, increasing the risk of a fire if the fluid ends up on a hot surface. In the case of a complete loss of fluid, drivers will need to use a lot more effort to steer. The automaker reports no injuries or accidents, and will advise customers when to head to the dealer for service. Related Video: Jeep Grand Cherokee and Dodge DurangoStatement: Vanity-Mirror WiringDecember 24, 2015 , Auburn Hills, Mich. - FCA US LLC is recalling an estimated 352,831 SUVs in the U.S. to help ensure vanity-mirror wiring may be serviced more consistently.Overheating conditions were reported among a small percentage of vehicles (<0.02%) serviced in connection with a related recall, conducted previously.** An FCA US LLC investigation discovered the service procedure, if not followed precisely, may leave vehicles susceptible to a short-circuit, creating a potential fire hazard.The Company is unaware of any related injuries or accidents. Post-service overheating conditions were observed only in vehicles equipped with a certain wiring package. These vehicles were produced before Sept. 2, 2012.Affected are model-year 2011-2012 Jeep Grand Cherokee and Dodge Durango SUVs produced before Sept. 2, 2012. Wiring in the headliners of these vehicles will be secured with a new adhesive.

Jeep reportedly releasing Peugeot-based, Fiat-built baby 'ute in 2022

Jeep is now under the same Stellantis-branded roof as Peugeot, among other European carmakers. It will take full advantage of its new ownership to quickly develop and launch an entry-level car, according to a new report. Anonymous sources told industry trade journal Automotive News that the yet-unnamed model will be positioned directly below the Renegade. Rumors of a baby Jeep have popped up time and again in the past few years, and most claimed it would share its underpinnings with the Fiat Panda 4x4, an immensely capable city car that's a regular sight in the Alps. Those plans have allegedly changed; the soft-roader is now being designed around the Common Modular Platform (CMP) that underpins the Peugeot 208 and the Citroen C4, among other models. Using the CMP platform unlocks several benefits. It's much newer than the architecture found under the Panda, it's highly modular, and it was developed with gasoline, diesel, hybrid, and electric powertrains in mind. It sounds like the first Peugeot-based Jeep will come standard with front-wheel-drive, and it will offer an optional four-wheel-drive powertrain consisting of a longitudinally-mounted engine that will spin the front wheels and an electric motor that will put the rear wheels into motion. Odds are the motor will be capable of powering the crossover on its own, too. Most of the powertrain components will come from Peugeot. CMP wasn't designed for hardcore off-roading, so we're expecting more of a shrunken Renegade for the boulevard than a downsized Wrangler for the trail. Fiat will build Jeep's smallest model in Tychy, Poland, in a factory that currently churns out the Fiat 500 and the Lancia Ypsilon. Production is tentatively scheduled to start in 2022, and it's too early to tell if we'll see the crossover in America. Its pocket-sized dimensions might keep it away from our shores. It will certainly increase Jeep sales on the European market, where models that sell relatively well in the United States regularly post dismal sales figures. For example, the Grand Cherokee is a seen as a leviathan of a family hauler and the Wrangler is heavily taxed. Peugeot's CMP platform will allegedly underpin the production version of the Alfa Romeo Tonale concept, too. Pegged below the Stelvio, the crossover was originally developed on the Renegade's bones — some sources claim that's still the case, and Alfa Romeo hasn't shed light on the matter. Reportedly, Fiat will later get a CMP-based car.

The 2018 Jeep Wrangler will look a lot like the 2017 Jeep Wrangler

JL Wrangler Forums suggests the next-generation Wrangler will be restyled in an evolutionary way that maintains the off-roader's classic looks yet adds new features. The forum used intelligence from spy photos and leaked images to assemble renderings of the new Wrangler. They show that the front end is still classically Jeep, but with modern updates. The LED headlights and turn signals revealed in FCA drawings are noticeable changes. An interesting touch is just behind the rear bumper, where there appears to be an air dam for aerodynamics. There's still a gap between it and the front fenders to keep the old-school look intact. The grille, windshield, and hood are also more raked for the sake of aerodynamics. At the back, the lights follow the FCA drawings as well, though the reverse lights from those illustrations appear to be absent. The square taillights are also shown on the truck variant, along with the plastic fender flares of the SUV version. Spy photos of the Wrangler pickup have shown a streamlined box with integrated taillights akin to the Ram, but it's likely to be a placeholder until the final design is selected. The sides of both models also feature more squared-off details in the top and door handles, generally with beveled corners for a more modern look. The top is where things get fuzzy. The new model might lose its removable top altogether, in favor of removable panels similar to the Jeep Renegade. JL Wrangler Forums illustrated how this could work in the above image. The roof can be removed in sections, and the rear-most windows can also be taken out. The overall effect is similar to that of a current Wrangler Unlimited. There is a potential drawback to this system, though. All of these hard panels will have to be left somewhere. And unlike the current model, this one wouldn't have a soft-top back-up when the weather turns. It's hard to say for sure if this design will make it to production. FCA has consistently and effectively hidden this part of its Wrangler prototypes since they were first spotted. At this point, we can only speculate on how the top will function. Otherwise, these renderings seem plausible, and we should know how accurate they are when the Wrangler makes its expected debut next year. The new Wrangler will likely have some aluminum body panels, an 8-speed automatic and an available diesel powertrain. For more details and spy photos, check out our post that has assembled everything we know so far about the 2018 Wrangler.