2 Cj 5s on 2040-cars

Auto blog

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.

Mahindra fights FCA's Jeep infringement claims

The Indian manufacturer Mahindra is fighting tooth and nail to keep building its Roxor off-road vehicle to sell in the United States. In early August, Jeep mother company FCA filed a complaint with the U.S. International Trade Commission to stop Roxor sales in the U.S. FCA claims the Roxor design is an intellectual property infringement on Jeep design, meant to undercut FCA's own Jeep products on the market. Now Mahindra has released a statement to the commission saying that FCA's complaint is without merit. While FCA stated in its claim that the Roxor is "an imported low-quality knock-off kit car," Mahindra points out that the vehicle took several years to develop and is manufactured in Michigan. Mahindra intends the Roxor to be an off-road vehicle only, and says it does not compete with Jeeps. The Roxor isn't road legal, only comes with a diesel engine and reaches a top speed of only 45 mph. However, it has to be said that the uncomplicated Roxor is far closer to the original ethos of WWII-era Jeeps than the Jeeps FCA currently manufactures. Mahindra also states that FCA agreed in 2009 not to bring about infringement claims as long as Mahindra used a grille design that FCA approved — going with a grille design that clearly differs from the classic Jeep trademark grille. The matter might partially muddled by the fact that the grille agreement was made with 2009's Chrysler instead of today's FCA. Looking back several decades, the entire Mahindra Roxor appearance is at its core based on a 1940s license agreement made with Willys, the original Jeep manufacturer. Mahindra's statement addresses FCA as "Fiat," and it should not be forgotten that Fiat itself manufactured a Jeep lookalike, the Campagnola, from 1951 to 1973 — also with a different grille. Fiat Industrial subsidiary Iveco's history page says the 1951 Campagnola was constructed "according to the Willys mould". Mahindra claims that FCA is using the complaint to create negative publicity to damage Mahindra's reputation. The Indian manufacturer reminds us that it is the first automotive OEM to set up a new manufacturing operation in southeast Michigan in over 25 years — in Auburn Hills, not far from FCA's U.S. headquarters. Related Video: Featured Gallery Mahindra Roxor Image Credit: Mahindra Design/Style Government/Legal Fiat Jeep Automotive History SUV Diesel Vehicles Off-Road Vehicles FCA mahindra

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums