1979 Jeep Cj Renegade on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Jeep Gladiator was designed as an outdoor lifestyle tour de force

LOS ANGELES — It's been more than 30 years since the last Jeep Wrangler-based pickup went out of production. And it's been more than a dozen years since a modern Jeep Wrangler-based pickup concept first taunted us with its chunky bed-shaped behind. But today, America's signature off-road brand has finally unveiled the production version of a Jeep Wrangler-based pickup. And it looks, rather predictably, like a four-door Jeep Wrangler with an open box in the back. (From some angles, it also looks like a Jeep that is towing itself.) "There were some key drivers that the designers had to work around," says Timothy Kuniskis, head of Jeep North America. "We wanted to not just go after Wrangler buyers, but after truck buyers. So this vehicle had to have four doors, four real doors. But the big thing was the bed. We know our consumer, the one who will be interested in this truck, and for them, it had to be the width of an ATV and the depth of two dirt bikes, so that dictated the size of the bed." This new trucklet is called the Gladiator, which is a departure from the name of the previous Wrangler-based pickup, the Scrambler. The Gladiator name does have Jeep heritage, having been the moniker of the full-size truck the brand sold from the mid-1960s to the early '70s. Since nomenclature is key in defining product and perception, we would be remiss if we did not note the key semantic differences between the names. A Scrambler is a go-getter (or resolutely confusing.) A Scrambler is nimble and scrappy. A Gladiator, on the other hand, is about vanquishing and conquest, and is typically gigantic. A Gladiator is domineering. Having only seen the photos, it was difficult to tell how big this thing is. Luckily, we've now seen it in person, and it is indeed big, but not huge. "It's a midsize pickup, a segment that is exploding now. Tacoma is and has been the dominant player in the category, but with GM coming back in and the Ranger joining soon, and now us, we're going to see this category get to 500,000 units a year very soon," says Kuniskis. "Everything that psychologically drives a consumer to a Wrangler, there's a sub-segment of those buyers whose needs push them toward a pickup. These aren't people who are going to fill the bed with mulch and boulders. It's not a work truck. It's absolutely a lifestyle choice. These are people who are into surfing, mountain biking, dirt bikes, side-by-sides." Jeep is in an interesting position from a design perspective.

Marchionne wants to nearly double Jeep sales by 2018

Jeep just keeps breaking its own sales records. A couple of weeks ago, the off-road brand announced its worldwide sales exceeded one million units for the first time, marking its third consecutive global record and the fifth straight year of sales increases here in the US. But FCA isn't about to stop there. TheDetroitBureau.com reports that chief executive Sergio Marchionne, speaking to the media at the Detroit Auto Show, has announced a new sales target for the Jeep division: By 2018, he wants to see Jeep sell 1.9 million units in a single year, nearly doubling its all-time record. The expansion will surely encompass new products, with the all-new Renegade just warming up, a next-generation Wrangler on the way and a reborn Grand Wagoneer in the pipeline, as well. But the focus of FCA's preparations to reach the new target is on production capacity. While it's not clear whether the Toledo, OH plant where half of all the Jeeps sold around the world are currently built will continue to host the next Wrangler, FCA is expanding production overseas. The Renegade is already being built alongside the Fiat 500X in Italy, where another 1,000 workers are being re-hired and where another factory is set to start producing Jeeps, as well. A Renegade-based variant for the South American market will soon be built in Brazil, and by the end of this year, Jeep aims to start local production in China.