1969 Cj 5 , Jupiter Green , T-98 A 4 Speed , 5: 38 Gears , Model 18 Transfe on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Jeep dealer buries WWII Willys GP in showroom floor

The Willys MB Jeep earned icon status during World War II thanks to its ruggedness, simplicity and go-anywhere ability. Following the war, it didn't take long for the handy vehicles to be scooped up by the public, and a brand slowly grew around the vehicles that has continued to thrive. Fast-forward to present day, where it's not uncommon for auto dealers to try to grab some of the magic of yesteryear by displaying classic models to connect customers with their brands' proud histories. Now, a Canadian Chrysler Group dealer is taking that notion to the extreme by actually making a vintage WWII Jeep part of its foundation.
Bay King Chrysler in Hamilton, Ontario, Canada, recently completed its new showroom, and the franchise really wanted to show its dedication to the Jeep brand. As dealer principal Jamie Richter tells Autoblog, the inspiration for the Jeep installation came from his brother, who became fascinated with a home that had a glass floor looking down into its wine cellar. The company already had the 1943 Willys MB to display, but it had originally planned to build a jungle gym around it for customers' kids. Now, the classic is literally in the floor as customers enter. Richter tells Autoblog that customer reaction so far has been "fantastic."
It's certainly a novel way to bring people into the showroom, and seemingly a nice nod not only to Jeep, but to the men and women who served in the war. If you want to see more about how the Jeep was actually installed and what it looks like, check out this video.

New spy photos of the next Jeep Wrangler reveal a backup camera

The new Jeep Wrangler JL is on the way, and we have new spy photos that give us our best look yet. The few vehicles seen in these photos all appear to be the four-door Wrangler Unlimited model, but we know the two-door and pick-up versions are coming as well. No word on when the new model, code-named JL, will debut, but don't expect to wait too much longer before Jeep finally finishes pulling off the wraps. While the Wrangler still is covered in test car camouflage, the "diaper" coverings have been removed from the side. But we still can't tell how the new removable roof and side panels will fit. One new nugget that we can spot is the spare-mounted backup camera. At least the Wrangler is keeping its rear-mounted spare. The overall shape hasn't changed much, but there would be pitchforks and fire in Toledo if Jeep strayed too far from the current design. Like the Porsche 911, the Wrangler's general design is permanently etched in stone. The grille is exposed on a few shots showing the new back-canted seven-slot setup that recalls the YJ generation of Wranglers. The windshield on the new model now appears to be fixed and tilted at more of an angle. Like we said, small changes. Related Video: Featured Gallery 2018 Jeep Wrangler Unlimited Spy Shots Image Credit: Spied Bilde Spy Photos Jeep SUV Off-Road Vehicles jeep wrangler unlimited jeep wrangler jl