2014 Jeep Cherokee Sport on 2040-cars

Auto blog

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Inline-6 Hemi replacement on the cusp of production from Stellantis

It appears that Stellantis is ready to put its long-rumored inline-six into production at its Saltillo, Mexico plant, possibly marking the beginning of the end of Chrysler's long-running 5.7L Hemi V8. But so far, the automaker's American brands have remained mum on where exactly the new turbocharged "Tornado" I6 may land. Stellantis powertrain blog Stellpower (by way of Muscle Cars & Trucks) spotted an entry for a new "GME T6" inline-six engine on the Saltillo facility's web site, suggesting that it was either in production or close to it. That entry has since been removed, but the mystery remains.  We've been hearing tidbits here and there about this new inline engine for years, but this is the first time we've seen anything suggesting its arrival is imminent. Usually, such a significant powertrain update would coincide with the launch of a new product to showcase it. So far, Stellantis has remained mum, even overseas, about where this engine is destined to reside. 2022 model year vehicles are likely off the table entirely.  But while it's common for new engines to debut with new cars and trucks, it's not a universal truth. Ford's Coyote V8 missed the corresponding Mustang refresh by a year, for example, orphaning the 2010 model and its much-needed styling updates with the old 4.6L V8 (and the 3.8L V6, for that matter; the 3.7L Duratec was also late to that party). Even sticking just to Stellantis, the JL Wrangler's powertrains have been a work in progress since it arrived back in 2018. The standard V6 and 2.0-liter turbo-4 debuted at launch; the EcoDiesel, 392 and 4xe all came later.  And 4xe may be the model by which to measure our expectations. Its introduction didn't come completely out of nowhere, but it was rather sudden for what turned out to be such a solid offering. That bodes well for the company's existing Hemi-powered trucks and SUVs. The Ram 1500, Jeep Grand Cherokee and Wagoneer are all strong candidates to receive the new Hemi replacement, as all would greatly benefit from even small improvements in fuel economy. If there's to be a future for the Dodge Charger and Challenger and Chrysler 300, they'd benefit too. And how about a Gladiator with the wick turned up, positioned as its equivalent to the Wrangler 392. Turn that Tornado into a Dust Devil. Don't worry; we've got plenty more where that came from.  Related Video This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Land Rover Defender V8 vs. Jeep Wrangler Rubicon 392 | V8 4x4s square off on paper

Land Rover pulled the sheet off its 2022 Defender on Wednesday, introducing another high-performance V8 to the off-road segment. This time, it's a 5.0-liter, supercharged V8 boasting 518 horsepower. It will be available in both the Defender 90 and 110 models. In the former, Land Rover says it can crack off a 0-60 run in just 4.9 seconds on its way to a top speed of 149 mph. The long-wheelbase 110 will be a bit slower, but "slow" probably isn't the right adjective to use here at all.  But Land Rover isn't the only automaker offering a high-performance variant of its off-road SUV. While Jeep may have been sneered at for presenting the 2021 Wrangler Rubicon 392 on the heels of the 2021 Ford Bronco's introduction, it starts to make a lot more sense in this context. There's reportedly a high-output Bronco on the way, too, so call Jeep the dinosaur of the group all you want, but you can't put a price on being first. Well, you can, actually, but that's not the point.  Thankfully, both Land Rover and Jeep have provided enough specs for us to rough out a comparison chart. Since the Rubicon 392 is offered only in four-door guise, we're looking at the long-wheelbase Defender 110 as its direct competitor here. Have a look: There are a few caveats to mention off the top. For starters, we don't have an official curb weight for the V8-powered Defender yet, as Land Rover has not finalized its U.S. specs. We used the European figures (as provided by a spokesperson), which we expect to be accurate within about 50 pounds. The 0-60 time provided by Land Rover was for the Defender 90, which is smaller and somewhat lighter than the 110. When equipped with the inline-6, the Defender 110 is about a tenth of a second slower to 60 than the Defender 90, so we figure it should be roughly the same for the V8.  While the Defender has nearly 50 horsepower on the Wrangler, that advantage disappears thanks to the Land Rover V8's monster weight penalty, which will fall somewhere between 600 and 700 pounds depending on equipment. Yikes. On the flip side, however, the Land Rover has the edge in top speed, and it's not even close. Chalk that up to the tires, we suspect. We know for a fact that the Rubicon 392's all-terrains dictate its speed limiter; Jeep's own engineers told us as much. This could make for a (hypothetically) interesting drag race, as the Jeep's advantage off the line may evaporate once triple digits come into play.