2014 Jeep Cherokee Limited on 2040-cars

Auto blog

2019 Jeep Cherokee finally reveals its all-new nose

We've known for a while that the refreshed Jeep Cherokee was going under the knife in order to ditch its controversial face. While the crossover's looks have grown over time, it was still a little too weird and awkward for some buyers. Now, thanks to our trusty spy photographers, we have a really good look at the Cherokee's new mug. Surprise! It looks like every other product in Jeep's lineup. The current model has a split lighting setup that places the main headlights down low, almost below the grille. The turn signals/parking lights are way up high, nearly on top of the fender. This new model has those two meet in the middle. The shape is generally what you would find on both the new Compass and Jeep Grand Cherokee. It's handsome, even if it does lose a bit of character. The rear, too, has been changed. The license plate moves up and into the tailgate, giving it a more muscular, less flabby look. The smaller rear reflectors have been moved upward. The taillights look different, but it's hard to say if those are just temporary units. Either way, expect a new design that once again cribs from the 2017 Jeep Compass. Since this is a refresh, don't expect to wait too much longer until we see the new model's debut. We could see it as soon as the Detroit motor show next month. Expect current powertrains to carry over with a slight boost in fuel economy. Related Video: Featured Gallery 2019 Jeep Cherokee Trailhawk spy shots View 14 Photos Image Credit: Spied Bilde Spy Photos Jeep Crossover SUV Off-Road Vehicles

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.

JL Jeep Wrangler experiencing death wobble, NHTSA checking into it

The redesigned 2018 JL Jeep Wrangler is selling remarkably well, but it looks like it's still susceptible to age-old Jeep solid front axle vehicle issues. Recently, the NHTSA has received 11 JL Wrangler-specific complaints for a problem referred to as "death wobble" in the Jeep community. It's currently looking into the complaints to see if further action is necessary. Death wobble is a term used predominantly by Jeep and specifically Wrangler owners to describe a violent steering wheel oscillation, typically caused by hitting some form of bump or pothole at higher speeds. For it to occur, there has to be something loose or damaged within the front steering or suspension system. The death wobble gets its name, because the vibrations through the steering wheel are far more frightening than any kind of a wheel imbalance problem. However, using the word "death" would be a misnomer as well, because there are no reported deaths due to the issue over decades of Jeeps experiencing the issue. A little over a month ago, FCA decided it needed to recall 18,000 JL Wranglers because of a faulty weld around where the track bar is welded to the frame. As of now, there's no evidence linking this faulty weld with death wobble (an FCA spokesperson told us as much), but one of the most common causes of death wobble is a track bar issue. If a bad track bar weld is your problem, you're in far worse shape than any death wobble, because you'll end up with a complete loss of steering. We asked Jeep about death wobble and a company spokesperson said that it "is not a widespread condition, nor is it a safety issue." FCA also said most of the incidents are linked to poorly installed suspension modifications, such as a lift-kit. However, the most current complaints for JL Wranglers describe unmodified and recently purchased vehicles. This means some vehicles still experience the issue despite being stock Wranglers. For now, if you experience the death wobble in your new Jeep, it's best to slow down immediately in a safe place. Most are taken by surprise by the sudden oscillations from the wheel, but you should still be able to control the car. FCA says that even if you do experience the issue, it is routinely corrected on its own. We'll keep tabs on this, and update if there are any developments. Related video: