2014 Jeep Cherokee Limited on 2040-cars

Auto blog

Jeep Cherokee recalled to add power liftgate moisture shield

The Basics: Jeep is recalling 55,687 examples of the 2015-2016 Cherokee that have the optional power liftgate and have production dates between February 18, 2015, and September 10, 2015. These include 32,784 vehicles in the US, 10,138 in Canada, 924 in Mexico, and 11,841 outside the NAFTA region. The Problem: Water can potentially leak onto the power liftgate control module and cause a short circuit. This is a potential fire hazard. Injuries/Deaths: Jeep has no reports of injuries or accidents The Fix: Dealers will inspect the area for damage and will replace parts as necessary. They will also install an improved moisture shield that will offer better protection. If You Own One: Owners should try to keep the cargo area of these vehicles dry until dealers perform the recall. More Information: Jeep also issued a recall for this issue for 164,003 total examples of the 2014-2015 Cherokee in June. RECALL Subject : Liftgate Module Short due to Water Leak Report Receipt Date: DEC 09, 2015 NHTSA Campaign Number: 15V826000 Component(s): ELECTRICAL SYSTEM , STRUCTURE Potential Number of Units Affected: 32,784 All Products Associated with this Recall Vehicle Make Model Model Year(s) JEEP CHEROKEE 2015-2016 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Cherokee vehicles manufactured February 18, 2015, to September 10, 2015 and equipped with the power liftgate option. In the affected vehicles, water mater leak into the Power Liftgate Control Module and result in a high resistance short circuit. CONSEQUENCE: A short circuit in the module increases the risk of a fire. REMEDY: Chrysler will notify owners, and dealers will inspect the module and connectors for corrosion, replacing the damaged components as necessary. The mastic shield will be removed and the module will be covered with a water shield. These repairs will be performed free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R67. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement: Moisture Shield Upgrade December 18, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 32,784 SUVs in the U.S.

FCA's puzzling trademark spree includes Apache and Orange Peelz

Here's one for the Mystery Machine. As noted by the WagoneerFans forum and picked up by Motor1, Fiat Chrysler recently went on a one-day trademark application spree at the U.S. Patent and Trademark Office. On March 6, the automaker applied for the names Apache, Farout, Orange Peelz, Shocker, Tomahawk, and Top Dog. All have been requested for "Land vehicles, namely, passenger automobiles," and the best guess so far has them being applied to concepts during next month's Easter Jeep Safari, which, assuming it goes ahead, will happen April 4-20. As for historical ties, one name has a connection to Dodge, another was a codename for a Dodge engine, and one was used on a previous Easter Jeep Safari concept. Tomahawk rings the loudest bell, that name applied to the four-wheeled, Viper-engined concept motorcycle that Dodge rolled out at the 2003 Detroit Auto Show. The company supposedly sold nine examples of the "rolling sculpture" through Neiman Marcus over a four-year period. It doesn't appear FCA has used the name since, internally or otherwise. There is, however, a Cherokee tomahawk — not referring to a Jeep, but the light, short-handled ax used by the Native American Cherokee tribe. This one seems made for Safari use. Apache has a Dodge and a Jeep tie-in. At one time, Apache was the codename for the 6.4-liter Hemi V8 marketed as the 392 V8 on the Charger and Challenger R/T Scat Pack trims. That engine makes 485 horsepower and 475 pound-feet of torque. But Jeep showed a Wrangler Apache concept (pictured) at the 2012 Easter Jeep Safari, built with a Mopar conversion kit for a 6.4-liter Hemi making 470 hp and 470 lb-ft. Mopar sold the V8 swap kits at least through 2016, but they appear to have fallen off the Mopar menu. At one time there were rumors of a supercharged Apache with more than 600 horsepower, and wouldn't that be a welcome surprise in Moab. The Farout could be a more or less extreme overlanding take on last year's Easter Jeep Safari Wayout concept, depending on whether one considers "way" or "far" more radical. The Shocker, Jeep might be disappointed to discover, already has an outside link in the Jeep Shocker stickers made for Wichita State fans who love America's 4x4. As for Orange Peelz, it's pretty close to Pedro's bicycling degreaser called Oranj Peelz, but a Jeep conception could be anything. Except maybe a paint color. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Jeep will build old Wranglers next to new ones in Toledo

Jeep made a lot of people happy when it confirmed that the next-generation Wrangler would continue to be built in Toledo, OH. Now, news is breaking about the lengths the automaker will go to in updating its northern Ohio factory. There's good news for Jeep dealers (more Wranglers to sell!), Jeep fans (more JKs to buy!), and Jeep itself (more money to be made!). According to a report from Automotive News, capacity at the factory will be increased to 350,000 units per year. That's around a 50 percent increase over what the Toledo complex can currently manage and is, according to Jeep boss Mike Manley, part of a move to keep production "at the right place" so "supply [stays] just behind demand." The other big news revealed by the AN report focuses on the future of the current Wrangler. Yes, the current JK has a future. It'll continue to be built at the Toledo factory up to six months after it successor arrives in showrooms, a move that's partially down to the way Jeep is shuffling production about. Toledo currently builds the Cherokee on a unibody production line – it'll continue to do so until March of 2017, when production will move to Belvidere, IL. The unibody line in Toledo will then be converted for body-on-frame production, which should take about six months. But during that time, the current JK (likely rebadged as a "Wrangler Classic") will continue to be built alongside another line of next-generation Wranglers, keeping dealers supplied with the today's Wrangler through March of 2018. The two Wranglers will overlap for about six months. This is all very good news if you've been waiting to pull the trigger on today's Wrangler. But move quickly – the clock is officially ticking. Related Video: News Source: Automotive News - sub. req.Image Credit: Bill Pugliano/Getty Images Plants/Manufacturing Chrysler Fiat Jeep FCA toledo Mike Manley