1999 Jeep Cherokee Sport on 2040-cars

Auto blog

Chrysler resolves recall issue with NHTSA, will inspect, upgrade affected Jeeps

Chrysler made big news earlier in the month by refusing a recall request from the National Highway Traffic Safety Administration for the 1993-2004 Jeep Grand Cherokee and 2002-2007 Jeep Liberty. Last week, NHTSA boss David Strickland countered by defending his agency's request for the recall of 2.7 million Jeep SUVs. Today marked the deadline for Chrysler to formally respond to NHTSA, and it seems that both parties have met in the middle with Chrysler inspecting and upgrading some of the affected vehicles without using the word "recall," which would constitute the admission of a defect; instead, Chrysler said that it is conducting a "voluntary campaign."
At issue on these vehicles is the positioning of the fuel tank behind the rear axle that could get damaged during a rear-end collision. NHTSA has stated that at least 51 people have been killed in rear-end collisions involving these Jeeps after the vehicles caught fire, to which Chrysler countered by pointing out that both models "met and exceeded" the requirements for fuel-system integrity.
As a compromise on the situation, Chrysler says that it will inspect all pre-2004 Grand Cherokees and pre-2007 Liberty models and, "if necessary, provide an upgrade to the rear structure of the vehicle." According to Automotive News, this upgrade will consist of adding a trailer hitch that will presumably better protect the rear-mounted gas tank. Vehicles already equipped with a factory or Mopar hitch will not be modified. Chrysler's official statement on the matter is posted below, but no additional information has been released, such as when the campaign will begin and how many vehicles could be affected.

Jeep and Ram diesel owners get $3,075 in lawsuit settlement

Owners of certain Ram 1500 and Jeep Grand Cherokees equipped with diesel engines will get up to $3,075 in compensation for repairs under a settlement of a class-action lawsuit against Fiat Chrysler over illegal emissions-cheating software. The roughly $800 million settlement was first announced in January and approved by a federal judge in California last week, according to Consumer Reports. The affected vehicles are 2014 to 2016 Ram 1500 pickup trucks and Jeep Grand Cherokee SUVs equipped with 3.0-liter EcoDiesel V6 engines. FCA will update the emissions control software, provide an extended warranty covering up to 10 years or 120,000 miles, and provide cash compensation. Eligible owners will get as much as $3,075, while eligible lessees, former lease holders and former owners will get up to $990, and partial owners will get up to $2,460. FCA has established an EcoDiesel Settlement website where affected owners can find more information on how to submit and track a claim and sign up for updates. Customers with questions can also call 833-280-4748. Vehicle owners will have 21 months to submit a claim, with a deadline of Feb. 3, 2021, and two years to complete the repair and receive compensation for it. Former owners and lease holders must submit claims by Aug. 1, 2019. The EPA in early 2017 issued a notice of violation to FCA after Jeep and Ram installed eight emissions control devices on diesel vehicles. FCA's settlement includes $311 million in total civil penalties to U.S. and California regulators, up to $280 million to resolve claims from diesel owners, $105 million in extended warranties, $72.5 million in state civil penalties and $33.5 million in payments to California for excess emissions and to resolve consumer claims. Auto supplier Robert Bosch GmbH, which provided emissions control software, is paying $27.5 million to resolve claims, plus $103.5 million to settle claims with 47 states. The federal court also approved consent decrees between FCA, the EPA and the California Air Resources Board, plus agreements with all 50 stats and the U.S. Customs and Border Protection. In a statement, FCA said, "The settlements contain no findings of wrongdoing, nor admission of any wrongdoing, by FCA US" and added that the software fixes will have no affect on average fuel economy, performance or other characteristics of the vehicles.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.