2024 Jeep Wrangler Sport S on 2040-cars

Auto blog

Jeep CEO details the next Wrangler's push for efficiency

Jeep CEO Mike Manley's brief for the new Wrangler is a simple one – don't mess it up. But in that pursuit of keeping things proper, the affable Englishman has revealed that the brand is trying to walk a fine line while bringing its most iconic model into the 21st century. That's most important on the car's exterior. Like other long-serving American vehicles, the Wrangler is defined by its image. But even with aerodynamics playing a bigger role on the JK's successor, Manley was adamant during a conversation with Automotive News that the boxiness will carry on. "You have to be very careful with the aero of Wrangler, because at the end of the day, it needs to be recognizable as a Wrangler," Manley told AN. "To some extent that restricts you on some of the aero that you can do." Spy photos show a more rakish windshield and fascia, both key moves to lessen the aerodynamic impact of the Jeep's traditionally brick-like design. "But with weight and a number of the changes that we've made, you're going to see that we've really pushed that vehicle forward in terms of its fuel economy." The context of that last sentence points to a weight savings, something Automotive News backs up. While the Wrangler won't go all-aluminum, its frame is going to be lighter and stronger, and it will use aluminum for certain "hang-on" body parts. But this push for weight savings won't extend to the Wrangler's intangibles. It'll still ride on a body-on-frame architecture and feature solid axles at both ends, for example. Combine Manley's comments and AN's reports with news that the Wrangler will use an eight-speed automatic and offer diesel and four-cylinder turbo power in its next generation, and it's clear Jeep is trying to make the biggest strides in decades without alienating its die-hard fans. Related Video: Featured Gallery 2018 Jeep Wrangler Detailed Spy Photos View 18 Photos News Source: Automotive News - sub. req.Image Credit: KGP Photography Green Jeep SUV Off-Road Vehicles Mike Manley

NHTSA closes book on Jeep 'trailer hitch' recall after all

After much debating and hand-wringing, the National Highway Traffic Safety Administration now says it has "no reservations" with Chrysler's plan to recall certain Jeep Liberty and Grand Cherokee models over concerns that their fuel tanks, which are located behind the rear axle, could rupture or leak in the event of a rear impact. The longstanding argument between the two entities saw Chrysler openly defy the Feds after a request to recall 2.7 million units back in June.
Chrysler's "voluntary campaign" will instead see it recall 1.56-million 1993-2004 model year Grand Cherokee SUVs, along with 2002-2007 Liberty models. Affected vehicles will get a trailer hitch installed free of charge, which Chrysler says will provide an additional degree of protection for the fuel tanks in the event of a crash. Jeeps with Mopar-branded hitches or hitches that were installed at the factory aren't affected by this recall.
Chrysler's argument throughout this battle has been that the Jeeps in question are no more susceptible to fires than comparable vehicles from the same time period, a position that NHTSA has seemingly arrived at as well. "Those vehicles performed at a rate similar to their peers. That is the keystone analysis as to whether something poses an unreasonable risk to safety," said outgoing NHTSA boss David Strickland during an interview with the The Associated Press.

FCA to invest $4.5B for new Detroit plant, expanded production at current facilities

We expected some shifts in manufacturing plans as Fiat Chrysler plans to begin electrifying its Jeep brand, but this news bodes well for Michigan. FCA announced today that it would spend $4.5 billion to expand production in the state, including building a new assembly plant in Detroit and increasing capacity at five other facilities in the state. The plan, which FCA says will create nearly 6,500 new jobs, will help to meet increasing demand for Ram and Jeep products, and to electrify Jeep models. $1.6 billion will be set aside to transform the Mack Avenue Engine Complex into a site to build the next generation of Jeep Grand Cherokee, as well as an unspecified, new three-row Jeep model. FCA says this part of the plan will create 3,850 new jobs. FCA is increasing its investment in the Warren Truck plant to $1.5 billion in order to continue building the Ram 1500 Classic, as well as the new Jeep Wagoneer and Grand Wagoneer, creating 1,400 new jobs. FCA says that the new Ram 1500 Heavy Duty will still be built in Saltillo, Mexico. At FCA's Jefferson North facility, the automaker will invest $900 million to upgrade the plant. This site will continue to build the Dodge Durango, as well help build the next Jeep Grand Cherokee. FCA expects this to create 1,100 new jobs. As Jeep plans to electrify models in its SUV lineup, each of the above plants will produce plug-in hybrid versions of the Jeep models produced there, "with flexibility to build fully battery-electric models in the future," the company said in its announcement. "Three years ago, FCA set a course to grow our profitability based on the strength of the Jeep and Ram brands by realigning our U.S. manufacturing operations," said FCA CEO Mike Manley, referring in part to earlier investments in Illinois, Ohio and Michigan. "Today's announcement represents the next step in that strategy," Manley continued. "It allows Jeep to enter two white space segments that offer significant margin opportunities and will enable new electrified Jeep products, including at least four plug-in hybrid vehicles and the flexibility to produce fully battery-electric vehicles." Other investments include $119 million to move production of the 3.0-, 3.2- and 3.6-liter Pentastar engines from Mack I to the Dundee Engine Plant, and $400 million for increased capacity and 80 new jobs at the Sterling and Warren stamping plants. This comes at a time when FCA's U.S.