2016 Jeep Wrangler Sahara Sport Utility 2d on 2040-cars

Auto blog

Chrysler expecting up to 200,000 9-speed transmissions for 3 models this year

Striving for improved fuel economy, we already knew that Chrysler will begin using a nine-speed automatic transmission in some of its new products this year, but what we haven't known is that volume at which this gearbox will be used. According to Bloomberg, Chrysler CEO Sergio Marchionne has been quoted as saying that the automaker expects to sell close to 200,000 units equipped with this new transmission in 2013. Those gear-rich trannies will be spread out across three models, consisting of the redesigned Chrysler 200, the still-unnamed Jeep Liberty replacement and the Dodge Dart.
This transmission should play a pivotal role in making Chrysler vehicles more competitive in their respective segments. Just for comparison, one of the Dart's key competitors, the Toyota Corolla, still uses a four-speed automatic, and a previous report indicates that the next-generation 200 could get up to 38 miles per gallon on the highway, which is better than most non-hybrid midsize sedans on the market. Marchionne says that the new Jeep model is expected during the second quarter of this year, but there is no word as to when the new 200 or nine-speed Dart will debut, but clearly Dodge would like to have the transmission in its compact yesterday. As for that volume figure, it definitely doesn't seem out of reach since the Dart, Liberty and 200 combined for a total of more than 225,000 units in 2012.
How many more gears can we expect in future cars? Probably not many more, since the CEO of transmission-builder ZF, Stefan Sommer, previously stated that nine speeds was the "natural limit" for transmissions.

Reveling in the reveals: BRZ, Civic, Wrangler, QX55

It’s almost like there should have been an auto show this week. If youÂ’re an enthusiast, you know the week before Thanksgiving is when the Los Angeles Auto Show kicks off. This year, thereÂ’s no L.A. show, at least until next May. But Subaru, Honda, Jeep and Infiniti rolled out significant new products this week, making us almost nostalgic for auto shows. Serendipity, or more likely previously allocated marketing budgets, gave us a familiar feel of new products, even though we couldnÂ’t feel or touch them under the bright lights of the Los Angeles Convention Center. LetÂ’s break them down: 2022 Subaru BRZ 2022 Subaru BRZ View 62 Photos Subaru stuck to basic formula here: The 2022 BRZ remains a rear-wheel drive sports coupe thatÂ’s supremely lightweight, adequately powered and attractive. Subaru debuts its new boxer four-cylinder in the BRZ. ItÂ’s rated at 223 hp and you need to rev all the way to 7,000 rpm to achieve that output. I'd prefer a bit more than the 184 lb-ft of torque the powerplant offers (reasonably low in the band at 3,700 rpm), for some more off-the-line grunt. Say 200 lb-ft, though itÂ’s almost a cliche to argue the BRZ is underpowered.  The outgoing BRZ is one of the purest cars IÂ’ve driven, so rather than harp on the power, which will ultimately be fine, give Subaru props for focusing on chassis improvements to improve rigidity by 60 percent and aid turn-in. Admirably, the curb weight is less than 2,900 pounds, and the manual in Premium trim checks in at the lowest, just 2,815 pounds.  Aesthetically, I like it. ItÂ’s busier than before, and thereÂ’s a lot more going on with the front fascia, wheel arches and fenders. ThereÂ’s a bit of a Porsche vibe up front, which is good, and a bit of a Honda Civic vibe in back (think 2010) thatÂ’s not.  ItÂ’s impressive that Subaru resisted the urge to gratuitously power up the BRZ and remained focused on the essence of its goodness and appeal to enthusiasts. 2021 Jeep Wrangler 392 2021 Jeep? Wrangler Rubicon 392 View 75 Photos What effect will the 2021 Ford Bronco have on the Jeep Wrangler? One school of thought is that it will actually make the Jeep better, and the 2021 Wrangler 392 is proof positive that will be the case. With the Bronco attracting spectacular levels of attention, Jeep could not sit idly by and remain focused on incremental changes. It needed to make a splash.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.