2015 Jeep Wrangler Unlimited on 2040-cars

Auto blog

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

JL Jeep Wrangler experiencing death wobble, NHTSA checking into it

The redesigned 2018 JL Jeep Wrangler is selling remarkably well, but it looks like it's still susceptible to age-old Jeep solid front axle vehicle issues. Recently, the NHTSA has received 11 JL Wrangler-specific complaints for a problem referred to as "death wobble" in the Jeep community. It's currently looking into the complaints to see if further action is necessary. Death wobble is a term used predominantly by Jeep and specifically Wrangler owners to describe a violent steering wheel oscillation, typically caused by hitting some form of bump or pothole at higher speeds. For it to occur, there has to be something loose or damaged within the front steering or suspension system. The death wobble gets its name, because the vibrations through the steering wheel are far more frightening than any kind of a wheel imbalance problem. However, using the word "death" would be a misnomer as well, because there are no reported deaths due to the issue over decades of Jeeps experiencing the issue. A little over a month ago, FCA decided it needed to recall 18,000 JL Wranglers because of a faulty weld around where the track bar is welded to the frame. As of now, there's no evidence linking this faulty weld with death wobble (an FCA spokesperson told us as much), but one of the most common causes of death wobble is a track bar issue. If a bad track bar weld is your problem, you're in far worse shape than any death wobble, because you'll end up with a complete loss of steering. We asked Jeep about death wobble and a company spokesperson said that it "is not a widespread condition, nor is it a safety issue." FCA also said most of the incidents are linked to poorly installed suspension modifications, such as a lift-kit. However, the most current complaints for JL Wranglers describe unmodified and recently purchased vehicles. This means some vehicles still experience the issue despite being stock Wranglers. For now, if you experience the death wobble in your new Jeep, it's best to slow down immediately in a safe place. Most are taken by surprise by the sudden oscillations from the wheel, but you should still be able to control the car. FCA says that even if you do experience the issue, it is routinely corrected on its own. We'll keep tabs on this, and update if there are any developments. Related video:

Infiniti looking for a new boss after Christian Meunier leaves to lead Jeep

Nissan's premium division Infiniti is expected to announce a new acting global chief for the brand, the company said, after its current head, Christian Meunier, left to lead the Jeep unit of Fiat Chrysler Automobiles. Nissan's chief quality officer Christian Vandenhende will oversee Infiniti's global operations effective immediately, until a new brand chief is named, Infiniti said in the statement on Tuesday. Meunier, 51, was named Infinit's global chief in early January after its previous boss Roland Krueger left the Hong Kong-based brand. Meunier will take over as global president for SUV-focused Jeep effective immediately, Fiat Chrysler said in a separate statement. Fiat Chrysler CEO Mike Manley had been running Jeep until he was elevated to the top job in July after the death of Sergio Marchionne. Meunier has international experience from his years with Ford, Land Rover, Nissan and Infiniti, which may prove valuable as Jeep attempts to expand overseas with a lineup of new products including the Gladiator pickup, a Wrangler plug-in hybrid, and the revived Wagoneer and Grand Wagoneer nameplates. He's worked mostly in sales and marketing roles, including as senior vice president of sales, marketing and operations for Nissan North America; chairman of Nissan Canada; and his recent role heading up Infiniti. An Infiniti spokesman said Meunier's resignation was not related to Nissan's internal investigation into its former leader Carlos Ghosn.