2015 Jeep Wrangler on 2040-cars

Auto blog

2019 Jeep Cherokee base model costs less, but other prices jump

Jeep just recently revealed the revised 2019 Cherokee crossover with a milder nose and tail, and even a bit more cargo space. The redesign has also brought new pricing that presents a $300 discount for the base Latitude trim, but sees increases across most of the rest of the trim lines. The destination charge also increased from $1,095 to $1,195. Four-wheel-drive is now a flat $1,500 increase for all models, whereas it varied between trims on the 2018 model. At the base of the Cherokee lineup is the Latitude, which now gets a price of $25,190, and that $300 reduction from the 2018 model carries over to the four-wheel-drive version. Latitude Plus sees a slight jump in price by $300 for the two-wheel- and four-wheel-drive models, with the two-wheel-drive one starting at $27,690. The Limited trim is up by $680 with both drivetrains, with a base price of $31,570 for one with two-wheel-drive. The biggest price increases come on the Trailhawk and Overland models. The Trailhawk soars $2,425 higher than last year's model, for a base price of $34,515. The Overland two-wheel-drive model also sees a big increase of $2,280 to a starting price of $36,275. But if you want four-wheel-drive in your Overland, the difference is a much more reasonable $535, for a base total of $38,970. View 104 Photos The 2019 Jeep Cherokee will be arriving at dealers soon. In addition to front-wheel-drive and two kinds of four-wheel-drive drivetrains, one with a single gear range and another with low range, a selection of three engines will be available. The standard engine on all Latitude, Latitude Plus, and front-wheel-drive Limited is a naturally aspirated 2.4-liter engine with 180 horsepower and 170 pound-feet of torque. All of those trims can have the optional 3.2-liter naturally aspirated V6 making 271 horsepower and 239 pound-feet of torque. The aforementioned Latitude Plus and Limited trims also have the new turbocharged 2.0-liter four-cylinder available as an option. That engine makes 270 horsepower and 295 pound-feet of torque. The four-wheel-drive Limited, and all Overland and Trailhawk trims have the V6 as a standard engine with the turbo four-cylinder as an option. All engines are coupled to a nine-speed automatic transmission. Related Video: Featured Gallery 2019 Jeep Cherokee: Detroit 2018 View 21 Photos Image Credit: Drew Phillips, Jeep Jeep Car Buying Crossover SUV Off-Road Vehicles

Jeep Liberty under investigation for door fires

The Jeep Liberty has already had plenty of attention for possible fires thanks to the first-gen model's fuel tank, but now the midsize Jeep is under the microscope of the National Highway Traffic Safety Administration for another fire-related concern. NHTSA has opened an investigation for the 2012 Liberty after receiving two reports of electrical fires in the driver's door.
According to the investigation summary, around 80,000 vehicles could potentially be affected by this problem. In both reported fires, the drivers noticed smoke and then flames from the master power window switch, and they had to pull to a stop and exit through the passenger side of the SUV. According to Autoguide, there was one injury to a motorist who suffered burned fingers while trying to open the driver's door.
Interestingly, the Dodge Nitro is not yet involved in this investigation, even though it was still around for the 2012 model year; the Nitro ended production in 2011 about a year before the final Liberty rolled off the line for the 2013 model year. Scroll down for the official NHTSA investigation summary.

Chrysler axes old V6s, goes all-Pentastar

Old technology has a way of lingering on, particularly at Chrysler headquarters in Auburn Hills. So while the Pentastar V6 has replaced the older engine architecture in just about every application, it still soldiered on in some export markets. But the introduction of a new 3.0-liter Pentastar V6, produced in Michigan and meant only for the Chinese market, has put the final nail in the old engine's coffin.
Fitted into the 2014 Jeep Grand Cherokee and Jeep Wrangler just introduced to China at the Chengdu Motor Show, the downsized six uses the same architecture as the larger 3.6-liter Pentastar V6. But because of its 2,997cc capacity, it can be exported to China without the increased duty the 3.6-liter or even 3.2-liter Pentastar engines would incur. The 3.0-liter V6 develops 230 horsepower at 6,350 rpm and 210 pound-feet at 4,400 rpm.
Admittedly, it's unlikely, but even though the engine was said to be created solely to undercut tax thresholds in China and Europe, the 3.0-liter Pentastar has recently surfaced in rumors of an application here: as the boosted heart of a potential Cherokee SRT with anywhere from 375 to 410 hp.