2013 Jeep Wrangler Rubicon on 2040-cars

Auto blog

Buy this instead of a Wrangler | 2017 Jeep Grand Cherokee Trailhawk Review

In our first encounter with the 2017 Jeep Grand Cherokee Trailhawk at Fiat Chrysler's Chelsea Proving Grounds, we saluted the new model's impressive on-road demeanor. In its off-road mode, however, we couldn't ignore the pre-production throttle calibration – it was super sharp and difficult to modulate with the precision needed to navigate obstacles. We were told then that Jeep's engineers were aware of the problem and were fixing it for production models. So we recently set off for Bundy Hill Off-Road Park in Jerome, Michigan, in a production-spec Grand Cherokee Trailhawk to check their work and get a better idea of the overall package. We can report that the Trailhawk's throttle has been fixed for production, landing it properly in Goldilocks territory. In the off-road Mud setting, the throttle is soft and easy to modulate. You can balance this rig with the gas pedal, reaching just past tip-in to steadily prod forward. But the gas pedal doesn't delay when you really need power. Move beyond the initial tip-in, and the engine responds quickly, which is a good thing, as a sluggish throttle is almost as dangerous off-road as one that's too sharp. Rock mode promises even more precise control over the throttle, although our lack of a spotter and a desire to avoid damaging the 700-mile-young Trailhawk kept us from hitting Bundy Hill's rockier sections. The wet, non-snowy weather meant we didn't properly test Snow or Sand mode. This test model was equipped with FCA's popular 3.6-liter V6, but like the rest of the Grand Cherokee range, more power is available from the 3.0-liter EcoDiesel V6 and the 5.7-liter Hemi V8. You don't need them – the 3.6-liter and eight-speed automatic are perfectly fine on the trails. Faced with an incline, the transmission holds its gear without complaint – you don't even need to switch into manual mode. Despite the 4,800-rpm torque peak, the V6's 260 pound-feet arrive early enough that you don't need to strong-arm the throttle. So that's resolution for the pre-production issue. But our time at Bundy Hill exposed a different and ultimately much easier to fix problem for the production model. Late fall in Michigan is not always a good time to go off-road – sub-40-degree temperatures and a steady, depressing drizzle can turn a relatively simple trail into a slippery mess of wet clay. Conditions like these can easily overwhelm an on-road tire like the Goodyear All-Terrain Adventures the Trailhawk uses.

Most American Cars | Honda Makes the Top 10 List

The car built with the most American/Canadian parts content is the 2021 Ford Mustang GT – with the manual transmission, specifically, no less – giving Ford a second consecutive year atop the American University Kogod Business School annual "Made in America Auto Index. We already knew that it doesn't get much more American than a V8 pony car, but now we've got the numbers to prove it.  Ford's iconic coupe takes the number one slot pretty convincingly this year, with 88.5% of its components coming from U.S. or Canadian sources. Appropriately, though perhaps confusingly, 21 models made the top 10 list in 2021. As you may have surmised, this is the result of multiple ties. Note also that many models appear more than once to account for variants built with parts from different sources. The top-ranked Mustang is a perfect example; The automatic drops into into a tie for 10th, right next to the EcoBoost model and Ram's 1500 Classic with the 3.6L V6.  The "America" theme runs pretty strongly through the top "10," with the Chevrolet Corvette sitting pretty in second place, followed by all three variants of Tesla's Model 3 electric car. Honda also makes several appearances thanks to its rather significant U.S. manufacturing footprint. Here are the 21 vehicles that make up the top 10 this year – don't worry, it feels just as weird to type as it does to read. Last year's winner, the midsize Ford Ranger pickup, cratered to 16th place, dropping from 70% American parts content to just 45%. Keep in mind, however, that the pandemic has forced automakers to source parts outside of their normal supply chains, and such drops should be taken with a grain of salt. Kogod noted that the overall proportions of content between manufacturers remained relatively unchanged despite what appear to be significant shake-ups such as this one.  "While the trend TDC for cars assembled in the US is consistent over time, both Daimler and Subaru saw significant drops in their average US content," the summary said. "This may be the result of US shortages of parts and components as the impacts of the covid pandemic created significant disruptions in automotive supply chains." Watch Ford Build a Bronco: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

7 months later, Jeep 'trailer hitch' recall still stalled

For the past few years, Chrysler and its CEO, Sergio Marchionne, have gone head-to-head with the National Highway Traffic Safety Administration and its boss, David Strickland, over the government safety agency's request for Chrysler to recall almost three-million Jeep vehicles due to what NHTSA says is a safety issue that has caused at least 51 deaths. After a three-year investigation and Chrysler's initial refusal to issue a recall because it deemed the vehicles safe and built to the day's federal requirements, last summer, the two parties compromised on a "voluntary campaign" to inspect 1.56 million vehicles, those being the 1992 to 1998 Grand Cherokee and 2002 to 2007 Liberty.
Those vehicles were designed with their gas tanks between the rear axle and the bumper, and NHTSA says that in rear-end collisions, damage to the fuel tank has caused fires responsible for those 51 deaths. The compromise reached last summer was that Chrysler would inspect 1.56 million vehicles and, "if necessary, provide an upgrade to the rear structure of the vehicle." Practically speaking, that meant Chrysler would replace aftermarket trailer hitches, but would take no action if a vehicle had a factory-installed hitch or an aftermarket hitch from Mopar.
A report in The Detroit News says the "voluntary campaign" is just now getting under way, with Chrysler saying last week that the design of the replacement part had been finalized and it was tooling up "to deliver the required volume." Seven months later, still in question is whether NHTSA will crash-test the fix engineered by Chrysler, noteworthy because not only did the vehicles in question pass every safety standard necessary to be cleared for sale at the time, there are still questions (to those of us on the outside) as to how the Jeeps at issue fare among their peers in such incidents. Either way, Chrysler and NHTSA apparently still disagree on the efficacy of the remedy itself: the carmaker says it might help in low-speed crashes but not high-speed collisions, a position the NHTSA is at odds with. All of this means the campaign doesn't yet have an end in sight.