2010 Rubicon 3.8l V6 12v 4wd Suv Tow Package Dvd Navigation Lots Of Upgrades on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

Poor headlights cause 40 cars to miss IIHS Top Safety Pick rating

Over the past few months, we've noticed a number of cars and SUVs that have come incredibly close to earning one of the IIHS's highest accolades, the Top Safety Pick rating. They have great crash test scores and solid automatic emergency braking and forward collision warning systems. What trips them up is headlights. That got us wondering, how many vehicles are there that are coming up short because they don't have headlights that meet the organization's criteria for an "Acceptable" or "Good" rating. This is a revision made after 2017, a year in which headlights weren't factored in for this specific award. This is also why why some vehicles, such as the Ford F-150, might have had the award last year, but have lost it for this year. We reached out to someone at IIHS to find out. He responded with the following car models. Depending on how you count, a whopping 40 models crash well enough to receive the rating, but don't get it because their headlights are either "Poor" or "Marginal." We say depending on how you count because the IIHS actual counts truck body styles differently, and the Infiniti Q70 is a special case. Apparently the version of the Q70 that has good headlights doesn't have adequate forward collision prevention technology. And the one that has good forward collision tech doesn't have good enough headlights. We've provided the entire list of vehicles below in alphabetical order. Interestingly, it seems the Volkswagen Group is having the most difficulty providing good headlights with its otherwise safe cars. It had the most models on the list at 9 split between Audi and Volkswagen. GM is next in line with 7 models. It is worth noting again that though these vehicles have subpar headlights and don't quite earn Top Safety Pick awards, that doesn't mean they're unsafe. They all score well enough in crash testing and forward collision prevention that they would get the coveted award if the lights were better.

The Jeep Yuntu is a plug-in hybrid SUV just for China

The Shanghai Auto Show has been host to a heaping helping of hybrids this year, and we have yet one more to share with you. Jeep created this Yuntu SUV Concept, and it features a plug-in hybrid powertrain. Interestingly, Jeep has very little to say about it, and didn't even provide hypothetical performance figure, apparently because it's just a concept. About the only thing Jeep did tell us was that the Yuntu was designed with a focus on Chinese consumers' tastes, also citing that the SUV segment is the fastest growing in the country. While the design may have been targeted at Chinese buyers, we think the Yuntu would find fans in the US, too. It mixes cues from both the Compass and the Renegade. The roof treatment, with a thick, upright, body-colored D-pillar and black roof come right from the Renegade, as does the generally boxy aesthetic. From the Compass comes the slim seven-slot grille and horizontal headlights. The inside has no parallels to the current Jeep line. It's a light, airy place with plenty of pale woods. The dashboard is effectively all screens, and the few buttons and switches present have a unique copper finish. It's far more futuristic and modern than any Jeep on sale right now. As for what this Yuntu means for the Jeep brand, there are a few possibilities. It could simply be a styling exercise that indicates where Jeep is headed in the future. These future design cues could be applied either to China-specific versions of current vehicles, or they could also appear on vehicles in other markets such as the US. It's also entirely possible that this concept is a preview of a new SUV designed just for the Chinese market. Jeep could do this fairly easily and affordably by putting a toned-down version of the Yuntu's design on the Cherokee platform, which is already built by FCA's Chinese partner, GAC. This wouldn't be the first time a car company created an SUV just for the Chinese market, either. Mazda did it with the CX-4, so Jeep certainly could, too. Related Video: