10 Jeep Wrangler Sport 4wd 41k Lifted Dual-top 20in-motometal 5th-wheel on 2040-cars

Auto blog

Jeep bringing Renegade Hard Steel with adorable matching trailer to Geneva

Trailers are hardly an uncommon site. They can, after all, be an effective way of adding cargo capacity when you need to haul more than you can fit in your car and truck. But there's something that just gets us about trailers made to match the vehicle behind which they're being towed. Like this one, attached to this unique Jeep Renegade. Set to be unveiled at the Geneva Motor Show mere days from now, the Renegade Hard Steel concept is a joint effort between various elements of the Fiat Chrysler Automobiles group, including Jeep, Mopar and the FCA Style Centre. It's based on the Trailhawk off-road model, but is distinguished by its unique metallic finish, offset by matte black trim and a full raft of available and custom Mopar accessories. Though Jeep has yet to show us what it looks like inside, it's said to have a specially coated leather finish. And of course there's that trailer. Designed to mimic the Renegade's rear-end styling, the appendage will be used on the floor of the Geneva Palexpo to showcase the vehicle's Uconnect Live infotainment system through an oversized pop-up touchscreen display that mirrors the new 5- or 6.5-inch display that'll soon be available on the littlest of Jeeps, offering streaming content including music, news, social media and traffic conditions. We have no indication that a similar trailer could be going into production (minus, of course, the infotainment stuff), but it's worth noting that Jeep has indeed done something similar before. Feel free to read more in the press release, below. Related Video: 27 February 2015 Renegade Hard Steel Jeep Showcar The Renegade Hard Steel Jeep showcar, which blends style, off-road vocation, and technology, will be making its debut and the 2015 Geneva International Motor Show. Created by the Jeep brand, in collaboration with the Mopar brand and backed by the FCA Style Centre, the showcar "explores" the potential of a model that provides countless customization options, while also providing an outlook for potential future Mopar accessories dedicated to the new Renegade. Based on the Trailhawk - the off-road version of the range - the prototype is not a simple customisation in aftermarket but a design project that, with due respect to the peculiarities of original models, has led us to the creation of a unique and fascinating article.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Autoblog Minute: Wrangler Pickup, Triumph Fined, Cherokee Production Moves

Autoblog senior editor Greg Migliore reports on highlights from the week in automotive news on this edition of Autoblog Minute. Show full video transcript text [00:00:00] Triumph Motorcycles in violation of the Safety Act, Jeep looks to adjust its vehicle production strategy, and a Wrangler pickup may soon be be produced in Toledo. I'm senior editor Greg Migliore, and this is your Autoblog Minute Weekly Recap. Triumph Motorcycles was hit with a $2.9-million fine because of a failure to submit safety documents to NHTSA in a timely fashion. An investigation of 1,300 bikes in September of 2014 led to this finding. Other violations were then discovered, like the late reporting of quarterly recall completion rates, and Triumph's failure to supply warranty data. Fines for these violations may seem harsh but U.S. Transportation Secretary Anthony Foxx said: "Manufacturers must comply with their reporting obligations. The law requires it, and public safety demands it. When companies fail to meet those obligations, we will hold them accountable." In FCA news, it seems that production of the Jeep Cherokee will be moved from the Toledo plant to a nearby state. Automotive News first reported on this adding that Jeep may produce a pickup alongside Wrangler to fill the void left by Cherokee. Jeep declined to comment on this news. Speculation surrounding Jeep's production plans depends on the automaker's ongoing negotiations with the UAW. Those are the highlights from the week that was. Be sure to check out my full recap this Saturday, including details on Ford's performance Fusion. For Autoblog, I'm Greg Migliore. Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals. Jeep Autoblog Minute Videos Original Video Triumph Motorcycles