1982 Jeep Wagoneer Modified 350 V8 on 2040-cars

Auto blog

2019 Jeep Renegade, Fiat 500X fuel economy revealed, slightly improved

The 2019 Jeep Renegade and Fiat 500X twins each get a new engine option, a turbocharged 1.3-liter four-cylinder. At 177 horsepower and 210 pound-feet of torque, it's substantially more potent than the 160-horsepower turbocharged 1.4-liter engine it replaces, and nearly matches the naturally aspirated 2.4-liter engine for power while beating its 175 pound-feet of torque. But we haven't known until now is how the new engine fares in terms of fuel economy. The numbers are a little tricky to parse, since both the Jeep and Fiat have changed what transmissions are available, as well as what combinations of engine and driveline are offered. We'll start with looking at the Jeep Renegade. It offers both the new turbo engine and the old 2.4-liter engine, but the manual transmission is gone, and the Renegade Trailhawk gets the turbo engine instead of the naturally aspirated one. All the numbers are below. Overall, the new turbo engine coupled with front-drive and the standard nine-speed auto returns better fuel economy than even the old manual-equipped combo. Both all-wheel-drive models do worse, though, with the automatic and the new engine than with the old engine with a manual. The new turbocharged Trailhawk also doesn't do as well on the highway as the old model, but does better in town. Fuel economy is unchanged for the 2.4-liter versions of the Renegade. 2019 Fiat 500X View 11 Photos The Fiat 500X range is simpler to follow, since only one variant is available now: the turbo 1.3-liter engine with all-wheel drive and an automatic. It's not quite as frugal as the fuel-sipping manual, front-drive turbo model from last year, but it does offer noticeable gains over the 2.4-liter versions. All the numbers are below.

Stellantis' production in Italy cut by up to 220,000 vehicles

MILAN — A global crunch in semiconductor supply could cost Stellantis up to 220,000 vehicles this year in terms of lost output in Italy, the FIM CISL union said, adding this would mark the fifth year in a row of declining production in the country. FIM CISL said in its periodic report on the group's production in Italy that Stellantis produced 351,890 vehicles in the first half of this year, almost 14% less than in the same period last year, with the key Melfi plant and the Sevel van-making facility being the most affected sites. Using data for the first half of the year and potential full-year production based on orders booked, the union estimates Stellantis could lose between 200,000-220,000 vehicles in 2022, said Ferdinando Uliano, the head of the FIM CISL union. "It's as if one of the group's large plants stopped for a year," he said, adding the chip supply situation was not improving this year and would also affect production in 2023. Uliano said factors including the war in Ukraine and the disruption to Russian gas supplies to Europe would only worsen the part supply situation for the automotive industry. A spokesman for Stellantis declined to comment on data and forecasts provided by FIM CISL, but repeated the carmaker had been taking decisions regarding the management of its operations on a day-by-day, plant-by-plant basis since the start of the COVID pandemic. Plants/Manufacturing Fiat Jeep

Your 2018 Jeep Wrangler can already be fitted with a Chevy LS V8

Over a long enough period of time, every car model on the planet will probably have at least one example receive a Chevrolet V8. And a large number of them will have an LS-series V8, commonly found in Corvettes and Camaros from the last 20 years (plus other GM vehicles in slightly different forms). Sometimes it doesn't take very long, as is the case with the 2018 Jeep Wrangler JL. The new Jeep has only been available for a couple of months, and already a company called Bruiser Conversions is offering to install LS engines under the hood. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Specifically, the company will install a GM Performance LS3 V8. Though Bruiser Conversions doesn't yet list exactly what specifications the engine has, it offers the LS3 in both 450- and 500-horsepower versions on the previous Wrangler JK generation. The new V8 will be fitted to the factory 8-speed automatic transmission, and the company says that the transmission will function exactly as it does with the original V6 or turbo inline-4. In addition, Bruiser Conversions says all factory gauges, cruise control, hill descent control and other electronic aids will work like they did from the factory. Pricing is currently not listed for the conversion, but the company is taking pre-orders for both in-shop installations and do-it-yourself kits. Going off the conversion costs for an older JK Wrangler, it will probably cost between $20,000 and $30,000 to have Bruiser Conversions do the installation. In the case of the JK kits, they're about $5,000 less than having Bruiser Conversions do the work. We've reached out to the company to see if we can get specific pricing and will update the post if and when we hear back. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Bruiser ConversionsImage Credit: Bruiser Conversions Aftermarket GM Jeep SUV Off-Road Vehicles Performance ls3