4wd 4dr Sport Low Miles Suv Automatic Gasoline 3.7l Dohc V6 Bright Silver Metall on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

2018 Jeep Wrangler spy shots give us best look yet

A couple weeks ago, we got a fairly comprehensive set of 2018 Jeep Wrangler spy shots. For fans of the JK-series Jeeps, it was all good news: the basic Wrangler Unlimited formula and shape is present and accounted for, meaning this new Wrangler will be an evolution of the current SUV, rather than a ground-up reimagining. The new shots give us some more detail than we had previously, and let us point out some JL Wrangler features that reaffirm FCA's conservative approach. First of all, the heavy camouflage doesn't manage to fully cover the exposed door hinges, just like in the current model, so those are a safe bet for the production version. The raked-back windshield might lose its ability to fold down, we've heard. The JL remains a body-on-frame truck with a solid front axle, evidenced by the front diff peeking out and the radius arms connected to them. The large exterior mirrors also appear to be carryover items, and the taillights look indistinguishable from the current JK. We expect the front fascia to remain clearly recognizable as a Wrangler, but don't be surprised if the headlight and sidemarkers incorporate some LED elements as a nod to current trends. Remember, the JL will spawn a pickup version, and will slim down for better fuel economy with some aluminum elements, likely incorporated in the body. We expect the Pentastar V6 to carry over, but be joined by a diesel and a mild hybrid at some point in the future. It'll be built alongside its JK predecessor for a short time in Toledo, Ohio. Related Video: Featured Gallery 2018 Jeep Wrangler Detailed Spy Photos View 18 Photos Spy Photos Jeep SUV Future Vehicles Off-Road Vehicles wrangler

FCA is setting a five-year strategy: Here's how the last one played out

We're slightly more than four years removed from Sergio Marchionne last five-year plan for FCA, a tell-all where the Italian-American automaker divulged its plans for the 2014 through 2018 model years. It was a grand affair, where Sergio told FCA investors that all was right in Auburn Hills, Alfa Romeo and Maserati were making comebacks, and the fifth-gen Dodge Viper received a mid-cycle refresh. You can read every last one of those past predictions right here. We're on our way to Europe to see Sergio's sequel, coming out Friday straight from FCA's Italian headquarters. (Bloomberg reports a plan to expand Jeep and Ram globally, combine Alfa Romeo and Maserati into a single division for an eventual spinoff, and downsizing Fiat and Chrysler. Also, EVs.) But before we arrive in Italy and find out exactly what Marchionne has planned for 2019 through 2023 as his last act as CEO, let's take a minute to tally up the results of his last term based on the same scoresheet we used in 2014. Now, we're only five months into 2018, so much of this — including vehicles like the Ram HD and Jeep Grand Wagoneer — could still debut this year. For those, we'll mark things TBD. We're not going to draw any conclusions or make any objectionable remarks. We're simply going to let the stats speak for themselves.