2007 Jeep Liberty Sport Excell Cond **low Miles 3836** 1st Owner/kept In Garage on 2040-cars

Auto blog

Project Trail Force Jeep Wrangler goes to SEMA, then to a lucky winner

Extreme Terrain is an aftermarket parts company focused on the Jeep Wrangler. Partly just because it's a really cool thing to do, and probably having something to do with Jeep's upcoming 75th anniversary, Extreme Terrain found some dance partners to help work up a special 2015 Wrangler Rubicon that it will show off at the Bantam Jeep Heritage Festival in Butler, PA, then at SEMA in November, where it will be given away. Extreme worked with Barricade Off-Road and Kevin Tetz from the Spike show Trucks! to build the Wrangler it calls Project Trail Force. There is more than $24,000 worth of aftermarket gear on it, starting with the Ripp centrifugal supercharger that pumps an additional 140 horsepower into the 3.6-liter V6. It's got a 3.5-inch lift kit from Rock Krawler, Dana 44 axles strung between 37-inch BFG tires, Barricade bumpers, a 9,500-pound winch, fender flares, rock sliders, a 50-inch LED light bar above the windshield, LED spotlights on the A-pillars, and seven-inch KC Hilites headlights. Rugged Ridge worked over the inside with upgrades like all-terrain floor and cargo liners, plus seat covers, and a new navigation system with a back-up camera. If you want to win it, you can enter the contest at Extreme Terrain once every week until Oct. 23. The winner gets flown to SEMA to have Kevin Tetz hand the keys over. If you just want to see it, you can head to PA for that heritage festival. The Project Trail Force will also lead a Jeep parade that could set a Guinness World Record. The press release below has a lot more info on the build. Good luck. EXTREMETERRAIN AND BARRICADE OFF-ROAD TO UNVEIL THEIR FULLY-BUILT 2015 JEEP WRANGLER AT BANTAM JEEP FESTIVAL ExtremeTerrain.com and Barricade Off-Road teamed up to build a $73,000+ 2015 Jeep Wrangler Rubicon to be given away to a lucky winner at the 2015 SEMA Show • Giveaway Link: http://www.extremeterrain.com/jeep-wrangler-project-trailforce-giveaway.html • Video: https://www.youtube.com/watch?v=jsO6fxVq6kI MALVERN, Pa. (June 12, 2015) – ExtremeTerrain, a leader in providing aftermarket Jeep Wrangler parts, along with rugged, enthusiast-driven Jeep Wrangler aftermarket armor and accessories manufacturer Barricade Off-Road, today unveiled a fully-built 2015 Jeep Wrangler Rubicon dubbed Project Trail Force at the Bantam Jeep Heritage Festival in Butler, PA.

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.