2005 Jeep Liberty Limited on 2040-cars

Auto blog

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.

Ford F-Series Super Duty earns Truck of Texas award

Texans love their pickup trucks, which you already knew. That means the Texas Auto Writers Association and its "Truck of Texas" award is a big deal. And the latest trophy goes to the 2017 Ford F-Series Super Duty. The pickup truck managed to snag TAWA's award at the 2016 Texas Truck Rodeo. The award marks the 13th time Ford's F-Series has been named the pickup king of the Lone Star State. Roughly 70 journalists converged outside at the Longhorn River Ranch, just outside of Austin, TX, for the 23rd annual Texas Truck Rodeo where a host of Ford's vehicles won awards. In addition to the F-Series Super Duty being named the "Truck of Texas," the 2017 Ford Super Duty won the Heavy Duty Pickup Truck award, while the 2017 Ford F-150 with the 3.5-liter EcoBoost V6 engine won the Best Powertrain award. The journalists also awarded Ford for having the "Truck Line of Texas." Ford wasn't the only winner at the Texas Truck Rodeo, as Nissan brought home five awards, including one for the 2017 Titan in the fullsize pickup category and one for the Armada in the SUV segment. Ram also won a few accolades with its trucks. The 2017 Ram 1500 won for being the most luxurious pickup truck, while the 2017 Ram 2500 Power Wagon won the off-road pickup truck award. Last year, TAWA named the 2016 Nissan Titan XD the Truck of Texas, but Ford's all-new F-Series Super Duty managed to keep the Japanese automaker's full-size offering at bay. For the 2017 model, Ford placed aluminum body panels into the F-Series Super Duty's body, which not only shed weight, but also make the truck stronger. Scroll down to see the entire list of TAWA's winners from the 2016 Texas Truck Rodeo. Truck of Texas: 2017 Ford Super Duty SUV of Texas: 2017 Nissan Armada CUV of Texas: 2017 Volvo XC90 Truck line of Texas: Ford Motor Co.