White Tan Leather Interior Limited Suv 3.6l Nav 4x4 1 Owner Low Miles Loaded on 2040-cars

Auto blog

NHTSA upgrading Jeep Grand Cherokee, Dodge Durango headliner fire probe

The National Highway Traffic Safety Administration investigation into headliner fires experienced by a small number of Jeep Grand Cherokee and Dodge Durango owners has been upgraded to an engineering analysis, the step before the initiation of a recall. In August last year the investigation began with 146,000 Grand Cherokees from 2012 after three complaints were received, but a report on Edmunds says it has been expanded to include 593,299 vehicles covering the 2011-2013 model years for the Jeep and the Dodge Durango, which uses the same headliner assembly, because of possibly 52 incidents of fire.
In some of those incidents drivers have reported a burning odor, smoke or open flames that were contained to the headliner or migrated to another area of the passenger compartment. The culprit has apparently been found: NHTSA blaming an electrical short in the sun visor vanity light wiring, which is routed under the headliner and held in place by three screws. Chrysler began its own probe into the issue when it was first reported and is still looking into the situation while, "fully supporting the National Highway Traffic Safety Administration's investigation."

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Jeep bringing Renegade Hard Steel with adorable matching trailer to Geneva

Trailers are hardly an uncommon site. They can, after all, be an effective way of adding cargo capacity when you need to haul more than you can fit in your car and truck. But there's something that just gets us about trailers made to match the vehicle behind which they're being towed. Like this one, attached to this unique Jeep Renegade. Set to be unveiled at the Geneva Motor Show mere days from now, the Renegade Hard Steel concept is a joint effort between various elements of the Fiat Chrysler Automobiles group, including Jeep, Mopar and the FCA Style Centre. It's based on the Trailhawk off-road model, but is distinguished by its unique metallic finish, offset by matte black trim and a full raft of available and custom Mopar accessories. Though Jeep has yet to show us what it looks like inside, it's said to have a specially coated leather finish. And of course there's that trailer. Designed to mimic the Renegade's rear-end styling, the appendage will be used on the floor of the Geneva Palexpo to showcase the vehicle's Uconnect Live infotainment system through an oversized pop-up touchscreen display that mirrors the new 5- or 6.5-inch display that'll soon be available on the littlest of Jeeps, offering streaming content including music, news, social media and traffic conditions. We have no indication that a similar trailer could be going into production (minus, of course, the infotainment stuff), but it's worth noting that Jeep has indeed done something similar before. Feel free to read more in the press release, below. Related Video: 27 February 2015 Renegade Hard Steel Jeep Showcar The Renegade Hard Steel Jeep showcar, which blends style, off-road vocation, and technology, will be making its debut and the 2015 Geneva International Motor Show. Created by the Jeep brand, in collaboration with the Mopar brand and backed by the FCA Style Centre, the showcar "explores" the potential of a model that provides countless customization options, while also providing an outlook for potential future Mopar accessories dedicated to the new Renegade. Based on the Trailhawk - the off-road version of the range - the prototype is not a simple customisation in aftermarket but a design project that, with due respect to the peculiarities of original models, has led us to the creation of a unique and fascinating article.