4x4 Jeep Safari Expediton Rig: Lifted, Arb Snorkel, Winch Bumper, New Engine on 2040-cars

Auto blog

25,000 Jeep Grand Cherokee, Dodge Durango SUVs recalled over brake feel

Chrysler has announced that it is recalling over 25,000 Jeep Grand Cherokee and Dodge Durango SUVs from several markets over concerns about brake feel under hard braking. The affected models are from the 2012 and 2013 model years, although the actual dates of production aren't available. 18,700 are in the US, while 825 are in Canada, 530 are in Mexico and a further 5,200 outside of North America.
According to a statement, Chrysler was informed of the issue by a component supplier for the Ready Alert Braking system, which primes the brakes in anticipation of an emergency stop. A component in the system was restricting the flow of brake fluid too much.
As Chrysler is quick to point out, the way the brakes functioned was in compliance with regulations and there are no reported cases of drivers losing braking power. Instead, the issue rests with what Chrysler calls a pedal feel that "was not consistent with customer expectations." So it would seem Chrysler is being proactive and fixing a problem not because there's a legal issue at work, but simply because it doesn't feel the way the manufacturer wants it to. Well done.

Jeep pickup confirmed, will be built in Toledo

Finally. In 2011 Jeep CEO Mike Manley said, "It is too late in Wrangler's product cycle to add a pickup. The 2015 or 2016 time frame makes more sense," when the next-generation Wrangler is due. A year later, Manley told an Australian outlet that a decision on a Jeep with a bed would come "pretty soon." Now, The Detroit News reports that the decision has been made, and it's a "Yes."A Wrangler-based truck is expected to arrive in 2017, sometime after the launch of the next Wrangler. And it'll be built in Toledo next to its sibling. Those desperate for a carry-all Wrangler have been able to buy Mopar's JK8 conversion kit for the past four years. Frankly, even though the Jeep Gladiator concept (pictured) is now 11 years old and the JT concept is nine years old, we think either one of them could roll off the line in a year and be welcomed with hosannas. This year's New York Auto Show will also be the site of the reveal of the compact SUV that will slot in between the Renegade and the Cherokee, built on the Renegade/Fiat 500X platform and replacing both the Compass and Patriot. Derided by many, in the US the two aging CUVs still sell terrifically well - they both hit records here last year. One of them will live on in name, the new SUV to be called either Compass or Patriot; the former name is bigger in international markets, the latter name gets more recognition here. That show is when we'll also get Fiat Chrysler's updated five-year plan that will take us through the presumed end of CEO Sergio Marchionne's tenure at FCA. Related Video: Featured Gallery 2005 Jeep Gladiator Concept News Source: The Detroit News Jeep Truck Off-Road Vehicles jeep compass jeep patriot jeep wrangler pickup

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.