4 X 4 Clean Loaded Jeep Grand Cherokee Limited V8 4x4 Nr (read Description) on 2040-cars

Auto blog

2018 Jeep Wrangler four-cylinder could be incredibly potent

Update: We hear the 368-hp rating in the NHTSA documents isn't accurate. The story has been modified to reflect that. Update 2: The document has been removed from NHTSA's website. We already knew that the next-generation Jeep Wrangler would offer two engines this time around, a V6 and a new turbocharged four-cylinder. Documentation from FCA to NHTSA that JL Wrangler Forums discovered suggests the V6 will become the entry-level engine with the same 285 horsepower as the current one, while the turbo 2.0-liter inline-four takes the top spot with 368 horsepower. However, we're now hearing that figure isn't accurate. That's an all-around impressive four-cylinder – and obviously likely too good to be true. Besides making about 80 more horsepower than its bigger V6 cousin, it would also be the second most powerful four-cylinder available in the United States. It would only be 7 horsepower shy of the current four-pot power champ, the Mercedes-Benz CLA45, which makes 375 horsepower. It's also 18 horsepower ahead of the next closest engine, the turbo four in the Focus RS that makes 350 horsepower. If you do decide to pick up a 2018 Wrangler with the four-cylinder, you'll have to settle for an automatic transmission. Only the V6 will be available with both an automatic and manual transmission. Both engines should be available at launch, which we expect to come shortly after an expected reveal at the Los Angeles auto show. The FCA documentation also suggests that the four-door model will be the first body style available, with the two-door arriving slightly later. Related Video: Featured Gallery Jeep Wrangler Spy Shots View 28 Photos News Source: JL Wrangler Forums / FCAImage Credit: KGP Photography Jeep SUV Off-Road Vehicles jeep wrangler unlimited

Next-gen Jeep Wrangler to pack 300-hp Hurricane turbo four

Fiat Chrysler has been working for some time now on a new turbocharged four-cylinder engine. Dubbed "Hurricane," the engine is now said to produce nearly 300 horsepower. And its first application could be in the next-generation Jeep Wrangler. With that much power coming from such a small engine, the Hurricane would offer an even higher level of specific output than the 1.75-liter engine in the Alfa Romeo 4C – one of FCA's highest-stressed engines – far eclipsing the 4C's 120 horsepower per liter with 150 hp/l. By way of comparison, the latest 2.0-liter, four-cylinder version of Ford's EcoBoost engine produces "only" 245 hp (122.5 hp/l). The 2.0-liter turbo four in the latest Mercedes-AMG CLA45 and GLA45, however, produces 375 hp. To get so much out of so little an engine, FCA will utilize a twin-scroll turbocharger and variable valve timing. That could make it ideally suited towards a compact performance model, but according to Automotive News, its first application could be in the new the Wrangler. The larger 3.6-liter Pentastar V6 produces 285 hp, nearly as much as the Hurricane will. But with a smaller engine, an eight-speed transmission, and aluminum construction, the new Jeep will likely benefit from dramatically-improved fuel consumption. Related Video:

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.