3.6l 1 Owner Smoke Free Cd W/ Aux Power Drivers Seat Rear A/c Vents Warranty on 2040-cars

Auto blog

2018 Jeep Wrangler will have an aluminum hood and doors, leaked memo says

Earlier this year, FCA CEO Sergio Marchionne revealed that 2018 Jeep Wrangler would feature a heavy dose of aluminum, though he didn't specify how. Now, JL Wrangler Forums says the Wrangler will use the material for the hood and the doors, citing an internal bulletin from aluminum supplier Alcoa. According to the forum, the company says the next-gen Wrangler will utilize Aloca's C6A1 (an internal name) high form alloy. The SUV will also get 6022 and A951 from Alcoa that will be used on the SUV's front and rear doors, as well as for the hood. Alcoa's C6A1 is the company's new high form alloy, while its 6022 alloy sheet can be found on things like a car's hood, door, or closure panels. Alcoa's A951 is the company's pre-treatment aluminum sheet bonding technology that it uses on automobiles. "A team in the Farmington Hills (Michigan, USA) Aerospace and Automotive Products group is leading a new profitable growth opportunity with the 2018 Jeep Wrangler program. The next generation Jeep becomes the first to utilize our C6A1 high form alloy; we are currently the only supplier of this high form product. Alcoa will also supply 6022 and A951, including front and rear door inners, hood outer and inner." As Marchionne pointed out earlier this year, the 2018 Wrangler won't be made entirely out of aluminum. So Alcoa's contribution to the upcoming SUV's doors and hood could be the only components that use the lightweight metal – or Jeep could be using another aluminum supplier for other parts. Large changes lie ahead for the 2018 Wrangler, which include a pickup version, new engines, and aluminum. But we do know that the next Wrangler is that it will be built in Toledo, OH, as FCA announced plans to spend $1.05 billion to retool the Wrangler factory, while also adding another site in Illinois earlier this year. Related Video:

FCA recalls 570,000 SUVs from Jeep and Dodge over fire woes

Fiat Chrysler US has issued two recalls covering a total of about 570,000 Jeep and Dodge models. The first concerns vanity mirror wiring in the Jeep Grand Cherokee from the 2011 and 2012 model years, and in Dodge Durango units built before September 12, 2012. The automaker recalled almost 900,000 units last year to repair the issue, then faced more issues this year when the fires continued in repaired vehicles. This new recall seeks to resolve the issue, FCA saying that the post-recall fires happened in a tiny percentage of vehicles equipped with a specific wiring package. This recall is for 352,831 total units in the US, another 26,478 in Canada, 13,037 in Mexico, and 84,330 internationally. No injuries or deaths have been reported. FCA says it will inform customers as to when they can schedule a service visit to remedy the issue. The second recall takes aim at 60,107 examples of the Jeep Compass and Patriot from the 2015 model year in the US, plus 5,755 in Canada, 3,351 in Mexico, and 23,995 in other markets. Those models could suffer from an out-of-position clamp on the power steering fluid line. The error could allow fluid to leak, increasing the risk of a fire if the fluid ends up on a hot surface. In the case of a complete loss of fluid, drivers will need to use a lot more effort to steer. The automaker reports no injuries or accidents, and will advise customers when to head to the dealer for service. Related Video: Jeep Grand Cherokee and Dodge DurangoStatement: Vanity-Mirror WiringDecember 24, 2015 , Auburn Hills, Mich. - FCA US LLC is recalling an estimated 352,831 SUVs in the U.S. to help ensure vanity-mirror wiring may be serviced more consistently.Overheating conditions were reported among a small percentage of vehicles (<0.02%) serviced in connection with a related recall, conducted previously.** An FCA US LLC investigation discovered the service procedure, if not followed precisely, may leave vehicles susceptible to a short-circuit, creating a potential fire hazard.The Company is unaware of any related injuries or accidents. Post-service overheating conditions were observed only in vehicles equipped with a certain wiring package. These vehicles were produced before Sept. 2, 2012.Affected are model-year 2011-2012 Jeep Grand Cherokee and Dodge Durango SUVs produced before Sept. 2, 2012. Wiring in the headliners of these vehicles will be secured with a new adhesive.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.