2020 Jeep Grand Cherokee Summit 4x2 on 2040-cars

Auto blog

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Hybrid and Electric Jeeps, Fiats, and Alfa Romeos to be built in Poland

WARSAW - Fiat Chrysler will invest more than $200 million in its plant in Tychy in Poland, where new hybrid and electric Jeep, Fiat and Alfa Romeo models will be built, Deputy Prime Minister Jaroslaw Gowin said on Tuesday. The investment comes as a boost to emerging Europe's largest economy, which is hoping a switch to electric vehicles can help its auto sector catch up with regional rivals including the Czech Republic and Slovakia. "Modern, hybrid and electric cars of the Jeep, Fiat and Alfa Romeo brands will start to leave the factory in Tychy in 2022," Gowin wrote on Twitter. Gowin said there could be further investment in the plant in future but gave no details. Fiat Chrysler, which is planning a $38 billion merger with French rival PSA to create the world's No.4 carmaker, said in a statement that early preparations for the expansion and modernization of the plant started in late 2020. The plant in Poland's industrial southern region of Silesia is one of the company's largest and currently employs around 2,500 people. Fiat Chrysler confirmed that new hybrid and electric Jeep, Fiat and Alfa Romeo models would be built in Tychy. It said the aim was to start mass production of the first of the three new passenger car models for the group's brands in the second half of 2022. Under a 2018-2022 plan, FCA pledged to invest 9 billion euros in electrification as part of investment plans totaling 45 billion euros. (Reporting by Alan Charlish and Agnieszka Barteczko in Warsaw, Silvia Recchimuzzi in Gdansk; editing by Jason Neely and Susan Fenton) Auto News Government/Legal Green Plants/Manufacturing Alfa Romeo Fiat Jeep Green Automakers Electric Future Vehicles Hybrid