2019 Jeep Grand Cherokee Altitude 4x4 on 2040-cars

Auto blog

Jeep Wrangler pickup's rear suspension is inspired by Ram

Although we've learned about all there is to know about the new Jeep Wrangler, there is still more to discover about its upcoming truck sibling, such as the rear suspension. We knew it would be coil-sprung, but these new spy shots also indicate that the suspension is more similar to what's under a Ram 1500 than the Wrangler SUV. In the gallery above, the first two images compare the rear suspension of a new-generation 2018 Wrangler (left) and the Wrangler pickup (right). Immediately obvious is that the shocks on the Wrangler SUV are mounted at the back of the axle, while the truck's shocks are mounted at the front. It's also possible to see that the anti-roll bar on the SUV is mounted quite high up, while the truck's bar sits much lower, near the base of the rear axle. The third image shows a Ram 1500 on the left and the Wrangler pickup on the right. Here we can see that the Ram shares the same sort of low-mounted anti-roll bars and forward-mounted shocks, along with a Panhard rod. The two aren't quite the same, though. For one thing, the Wrangler pickup's rear axle looks more like the Wrangler SUV's than the one on the Ram. It's possible that these suspension changes were made in an effort to boost the Wrangler truck's payload capabilities. It's also possible that there are some handling quirks to the long truck body style for which a Ram-style suspension was better suited. We'll look forward to learning more about the differences when the truck is revealed, likely in early 2019. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Project Trail Force Jeep Wrangler goes to SEMA, then to a lucky winner

Extreme Terrain is an aftermarket parts company focused on the Jeep Wrangler. Partly just because it's a really cool thing to do, and probably having something to do with Jeep's upcoming 75th anniversary, Extreme Terrain found some dance partners to help work up a special 2015 Wrangler Rubicon that it will show off at the Bantam Jeep Heritage Festival in Butler, PA, then at SEMA in November, where it will be given away. Extreme worked with Barricade Off-Road and Kevin Tetz from the Spike show Trucks! to build the Wrangler it calls Project Trail Force. There is more than $24,000 worth of aftermarket gear on it, starting with the Ripp centrifugal supercharger that pumps an additional 140 horsepower into the 3.6-liter V6. It's got a 3.5-inch lift kit from Rock Krawler, Dana 44 axles strung between 37-inch BFG tires, Barricade bumpers, a 9,500-pound winch, fender flares, rock sliders, a 50-inch LED light bar above the windshield, LED spotlights on the A-pillars, and seven-inch KC Hilites headlights. Rugged Ridge worked over the inside with upgrades like all-terrain floor and cargo liners, plus seat covers, and a new navigation system with a back-up camera. If you want to win it, you can enter the contest at Extreme Terrain once every week until Oct. 23. The winner gets flown to SEMA to have Kevin Tetz hand the keys over. If you just want to see it, you can head to PA for that heritage festival. The Project Trail Force will also lead a Jeep parade that could set a Guinness World Record. The press release below has a lot more info on the build. Good luck. EXTREMETERRAIN AND BARRICADE OFF-ROAD TO UNVEIL THEIR FULLY-BUILT 2015 JEEP WRANGLER AT BANTAM JEEP FESTIVAL ExtremeTerrain.com and Barricade Off-Road teamed up to build a $73,000+ 2015 Jeep Wrangler Rubicon to be given away to a lucky winner at the 2015 SEMA Show • Giveaway Link: http://www.extremeterrain.com/jeep-wrangler-project-trailforce-giveaway.html • Video: https://www.youtube.com/watch?v=jsO6fxVq6kI MALVERN, Pa. (June 12, 2015) – ExtremeTerrain, a leader in providing aftermarket Jeep Wrangler parts, along with rugged, enthusiast-driven Jeep Wrangler aftermarket armor and accessories manufacturer Barricade Off-Road, today unveiled a fully-built 2015 Jeep Wrangler Rubicon dubbed Project Trail Force at the Bantam Jeep Heritage Festival in Butler, PA.

Jeep's 75th Anniversary Wrangler Salute rolls down the line

UPDATE: The commemorative 75th Anniversary Jeep Wrangler rolled down the assembly line in Toledo, Ohio today. With its roll bar, doors, and rear seat removed, it really does pay fitting tribute to the classic Willy military models of the past. The 419 area code stenciled on the bumper and date on the hood look period appropriate. Well done, Jeep. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. It's difficult to pinpoint exactly when the Jeep Wrangler was born, but the automaker claims the legendary off-roader as we know it today was officially created in 1941. On July 15th of that year, the US Government awarded Willys-Overland with a contract to build the Willys MB, which quickly got the nickname "jeep". To commemorate its 75th anniversary, Jeep has created a WWII-themed Wrangler that pays homage to the Willys MB. The gorgeous concept most likely won't see the road, which is a shame as the rugged one-off yanks at the heartstrings of truck enthusiasts and historians alike. Based on of the current Wrangler Sport, the olive-drab Wrangler 75th Salute concept imitates the original Willys MB to the tee. The concept has no B-pillars, no doors, no roll bars and honors the "function over form" styling of the original military vehicle. The concept rides on 16-inch steel wheels that are wrapped in 32-inch non-directional tires and features vintage-looking hood latches, steel front and rear bumpers with tow hooks, and low back canvas seats. The Salute concept will be built on the same assembly line in Toledo, OH that has produced the Wrangler for decades. In addition to putting out an image of the concept, Jeep also touched on the rich history of the original Willys MB, which you can read below. Related Video: In July 1940, the U.S. military informed automakers that it was looking for a "light reconnaissance vehicle" to replace the Army's motorcycle and modified Ford Model-T vehicles. The Army invited 135 manufacturers to bid on production and developed a lengthy specification list for the vehicle, including a 600-lb. load capacity, wheelbase less than 75 inches, height less than 36 inches, smooth-running engine from 3 to 50 miles per hour, rectangular-shaped body, four-wheel drive with a two-speed transfer case, fold-down windshield, three bucket seats, blackout and driving lights and a gross vehicle weight below 1,300 lbs.