2014 Jeep Grand Cherokee Limited on 2040-cars

Auto blog

Jeep beefs up the Wrangler Rubicon with 2017 Recon Edition hardware

The Wrangler Rubicon Hard Rock is dead. Don't worry; the 2017 Rubicon Recon is heading to showrooms soon to take its place, and judging by what it's packing you'll hardly miss the Hard Rock. Essentially, this is a Rubicon with some beefed-up bits underneath and a few special cosmetic tweaks, a bit like the outgoing Hard Rock. Up front, there's a stronger Dana 44 with strengthened tubes and heavy-duty end forgings. Likewise, the front and rear differentials get stronger cast covers than the Hard Rock's stamped ones. The ratios are the same, with 4.10:1 front and rear ratios, Tru-Lok locking diffs, and a Rock-Trac transfer case. There's also a half-inch lift. Cosmetically, there are new 17-inch wheels exclusive to the Recon equipped with 32-inch BF Goodrich KM tires, and the rock rails have been reshaped to allow owners to fit 35-inch tires without interference. The Recon also adds red seatbelts and stitching, something you haven't been able to get in a Wrangler before, a Jeep rep told us. If that's what you were waiting for to get into a Wrangler Rubicon, well, there you go. There's also the special-edition farkles you'd expect: a dashboard plaque the fender badge, and a unique gauge cluster treatment. The two-door Recon will start at $40,140 and the four door at $43,940 – that's compared to the base Rubicon, which starts at $34,190 in two-door form. So, the Recon represents a nearly $6,000 premium over the base Rubicon and a $1,150 premium over the outgoing Hard Rock. It'll be available in dealers at the end of this month. Related Video:

EPA suspected Fiat Chrysler of using 'defeat device' in 2015

U.S. regulators told Fiat Chrysler Automobiles in November 2015 that they suspected some of the automaker's vehicles were equipped with secret software allowing them to violate emission control standards, according to emails disclosed on Friday. The U.S. Environmental Protection Agency and California Air Resources Board accused Fiat Chrysler in January of using the software, known as a "defeat device," to illegally allow excess diesel emissions in 104,000 Jeep Grand Cherokees and Dodge Ram 1500 trucks built between 2014 and 2016. Byron Bunker, director of the EPA's Transportation and Air Quality compliance division, said in a January 2016 email to Fiat Chrysler, obtained by Reuters under the Freedom of Information Act, that he was "very concerned about the unacceptably slow pace" of the automaker's efforts to explain high nitrogen oxide emissions from some of its vehicles. Nitrogen oxide is linked to smog formation and respiratory problems. Bunker's email said the EPA had told Fiat Chrysler officials at a November 2015 meeting that at least one auxiliary emissions control device on the car maker's vehicles appeared to violate the agency's regulations. Mike Dahl, head of vehicle safety and regulatory compliance for Fiat Chrysler's U.S. unit, responded in a separate email that the company was working diligently and understood the EPA's concerns. He added that if the EPA identified Fiat Chrysler vehicles as containing defeat devices it would result in "potentially significant regulatory and commercial consequences." The documents redacted the vehicles named, but two officials briefed on the matter said they referred to diesel models. The EPA's November 2015 meeting with Fiat Chrysler came two months after Volkswagen AG, mired in a major tailpipe emissions scandal, admitted to installing secret defeat device software in hundreds of thousands of U.S. diesel cars to make them appear cleaner than they were on the road.

Jeep mixed a CJ, a TJ, and a JK to make this sweet retro CJ66

What do you get when you mash-up a CJ and two Wranglers? Jeep calls it the CJ66, its concept for the 2016 SEMA show. It's a Frankensteined machine done right, another in a long line of fantasies from the back rooms at Jeep. A lot of donor vehicles were sacrificed for this one. The body came from a 1966 Jeep CJ – hence the name – and then was modified to fit on a Jeep Wrangler TJ chassis. The finishing touches, such as the bumpers and lights, come from the current Wrangler JK, and the hood was modeled after a JK's, too. The CJ66 has plenty of other neat details throughout as well, such as the vintage-style V8 badges on the fenders, the chains on the dropdown tailgate, and the custom hood latches. Also, like several other FCA SEMA concepts this year, it gets a pair of Dodge Viper seats. We're suckers for Viper seats. View 17 Photos The custom body also hides some impressive off-roading gear. There's a Warn winch tucked behind the front bumper, as well as an on-board tire inflation system, which makes it easy to deflate and inflate tires as the terrain requires. The truck also has 35-inch off-road tires on readily available wheels, front and rear differential lockers, and a custom roll cage and rock sliders. As you may have guessed from the V8 badges, this CJ66 also packs an octet of pistons. The 5.7-liter Hemi engine (or 345 cu. in. for traditionalists) makes 383 horsepower, and was installed using Mopar's new engine swap kit. The engine is hooked up to a six-speed manual transmission that sends power to Dana 44 axles front and rear. We have a feeling it will handle just fine on the trails. Related Video: Image Credit: FCA and Joel Stocksdale SEMA Show Jeep SUV Concept Cars Off-Road Vehicles SEMA 2016