2021 Jeep Grand Cherokee L Overland on 2040-cars

Auto blog

Daily Driver: 2015 Jeep Renegade Sport 4x4

Daily Driver videos are micro-reviews of vehicles in the Autoblog test fleet, reviewed by the staffers who drive them every day. Today's Daily Driver features the 2015 Jeep Renegade Sport 4x4, reviewed by Adam Morath. Something to note: The vehicle tested here is a pre-production unit, and we had some issues with the MySky removable roof system. (Associate editor Brandon Turkus mentioned these problems in his Quick Spin.) FCA confirms that improvements were made for production-spec cars. You can watch the video above or read a transcript below. Watch more Autoblog videos at /videos. [00:00:00] Hey, this is Adam Morath with another Daily Driver. Today, we're in the 2015 Jeep Renegade and I'm excited to be driving this in a Sport trim level. That's the lowest trim that they offer it in. I say I'm excited, because often we get the cars to totally spec-ed out to the max, the automaker trying to show off what they can do with the car but it doesn't always give you a realistic view of how most customers are going to spec the car, and I think with the Renegade being the entry-level model for Jeep now [00:00:30] replacing the outgoing Patriot and Compass, it makes sense to drive this in the Sport trim. We do have it in 4x4, comes in at just around $23,000. It's powered by a turbocharged 1.4 liter inline 4 and we've got it, made it to the 6-speed manual transmission, which is pretty cool. Again you can see FCA's fingerprints on this car. If they wanted to do well in Europe, of course you've got to offer it with a manual and that's nice for consumers here to have that choice of having a stick shift in the Jeep again. [00:01:00] That's kind of fun. It produces 160-horsepower, 184 pound-feet of torque. It's got a little pack to it. I wouldn't call it sporty but it's enough for a vehicle of this size. This is a pretty basic version of the renegade. The only options we have on it are the AC, the roof rails, 4-wheel drive, which is a must here in Michigan and then these MySky roof panels, which I'll get to in a minute, but that takes us from a base price of $18,000, the cheapest you'll be able to get into a Renegade for [00:01:30] up to about $23,700, which is where we're at. Yes, these are MySky roof panels. It's a totally new feature on the Renegade that Jeep is trying out and I think it's pretty cool. It's like a tee top system, except the panels aren't side by side. You have one in the front and one in the back.

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.