2024 Jeep Gladiator Rubicon on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Fiat Chrysler working on an inline-six to replace the Pentastar V6?

Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.

It lives! Our first glimpse of the Jeep Wrangler pickup

Okay, it's real now. We've been hearing rumors for years, and Jeep officials have confirmed a pickup will be added to the next-gen Wrangler lineup, but now we have our first photographic evidence of the long-awaited variant. It looks huge, and we're totally okay with that. These photos show a very-long-wheelbase Wrangler with a decent-size pickup bed. It looks to be about the same overall size as the AEV Brute Double Cab Wrangler pickup conversion, which itself is about the length of a Suburban. The bed appears to be in the five-foot range, maybe slightly shorter than the standard box of a half-ton truck. And those taillights, or at lest the covers on them, recall the shape of the lights on a Ram. These overhead shots also give a better look at the next Wrangler's evolved seven-slot grille. We see bigger spacing between thinner ribs, which would seem antithetical to the goal of improving the Wrangler's traditionally poor aerodynamics. It's possible FCA is using an air shutter to manage airflow, as it does on the Ram pickups and some other products. Related Gallery 2018 Jeep Wrangler Detailed Spy Photos View 18 Photos To recap what we know about the next Wrangler: It's expected to offer a gas V6 once again, as well as a turbocharged four-cylinder nicknamed Hurricane and an EcoDiesel-branded diesel engine. There have also been rumors of a hybrid powertrain. We don't yet know how many of those engines will make it to the pickup, but at least one gas engine and the diesel are safe bets. People love the idea of diesel Jeep pickups. We also know from interior spy photos that at least some of those new powertrains will use an eight-speed automatic. That, the modern engines, and improved aero will help the Wrangler be more efficient while still retaining much of its rugged, blocky look. The two- and four-door Wranglers are expected for the 2018 model year, with the pickup following for 2018 or 2019. Related Video: