14 Compass Sport 4x2, 2.0l 4 Cylinder, Auto,cloth,pwr Equip,cruise,clean 1 Owner on 2040-cars

Auto blog

Chrysler recalling 31k SUVs and vans

Chrysler is issuing recalls covering roughly 31,700 vehicles worldwide due to two separate problems. In both cases the company believes that most of the affected vehicles are either still on, or in transit to, dealer lots.
One recall covers roughly 10,700 Dodge Durango, Jeep Cherokee, Grand Cherokee and Grand Cherokee SRT models from the 2014 model year built between January 16 and April 17, 2014. The SUVs need a software update for the cruise control. It's possible that when the cruise is on and the driver presses on the throttle, the acceleration could last a second after the pedal is released or two seconds for the SRT. Afterward, they return to the speed originally set by the driver.
Chrysler says it isn't aware of any accidents, injuries or even reported incidents of this happening in the real world. Also, in all cases, if the driver presses on the brake, the cruise shuts off. The automaker believes that there are about 6,100 affected SUVs in the US, 950 in Canada, 425 in Mexico and 3,200 outside of North America. The software upgrade will be ready shortly, the company says.

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.

Marchionne defends FCA recalls, says Wrangler won't be all-aluminum

FCA CEO Sergio Marchionne recently received the 2015 Industry Leadership Award from the SAE Foundation. While speaking with the press after the event, the boss discussed his thoughts about some key issues regarding the company's future. One of the big regulatory issues facing FCA at the moment is the upcoming public hearing by the National Highway Traffic Safety into the automaker's handling of 20 recalls. Marchionne has no intention of testifying there, according to The Detroit News. The CEO also thinks that the government regulator is becoming much more aggressive in how it handles safety campaigns, but the Feds aren't necessarily doing a very good job of communicating that. "We need to work with the agency in a very cooperative and open way to make sure that we can meet their requirements for their new stance," he said, according to the newspaper. "We have no option but to comply with their requirements and we will. I have nothing to hide in this process. I just want clear rules." Marchionne also dropped the news that the company has changed its mind about making the next Jeep Wrangler totally from aluminum. "Because of the difference in cost, not just the new material but the actual assembly process, I think we can do almost as well without doing it all-aluminum," he said to The Detroit News. This seemingly opens the door for the model to remain in production in Toledo, OH, but only just a crack. Marchionne says that the new Wrangler would still use a large amount of aluminum, and there are "at least" two sites in contention for the assembly. The company doesn't have too long to make a decision because the model reportedly launches in 2017.