2006 Jeep Commander Limited V8 Hemi - Excellent Condition - 95,000 Miles on 2040-cars

Auto blog

Toledo continues fight for Jeep Wrangler production, despite mayor's death

Where will the next-generation Jeep Wrangler be built? That's an open question, but it's one that the city of Toledo, OH desperately wants to be the answer to. The city suffered a major blow, though, with the death of Mayor Michael Collins earlier this month. Collins had been the city's biggest champion during talks with Fiat Chrysler Automobiles, before suffering a fatal heart attack on Feb. 6. But Collins' tragic death isn't dampening the city's desire to carry on as the home of the Wrangler. "The mayor's passing is tragic. But on Monday, when I came to work, I knew exactly what I needed to do and exactly what needed to be done," the city's director of development, Matt Sapara, told the Detroit Free Press. According to the Freep, Sapara said Toledo and the state of Ohio have delivered an outline of a development plan that would give FCA the ability to buy an extra 100 acres to expand the factory. This is to help accommodate FCA's targeted output of 300,000 to 350,000 next-generation Wranglers, up from the 240,000 the factory can make now. "Our target in the proposal is to provide a way to increase the production capacity to a number that allows Fiat Chrysler to meet its business model," Sapara told the Freep, adding that the land could be available later this summer. FCA, meanwhile, has shown a somewhat ambivalent attitude towards Toledo production, with CEO Sergio Marchionne openly discussing the pros and cons of continuing to build the Wrangler south of the Michigan border. "We are going to take a very hard look at this without ignoring what these guys have done," Marchionne told the Free Press at last month's Detroit Auto Show, adding that he'd like to keep production there, provided the cost of retooling is comparable to relocating to another facility. Related Video:

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking