2006 Jeep Commander Base on 2040-cars

Auto blog

NHTSA investigating power modules on Chrysler Group SUVs and minivans

The Center for Auto Safety is officially petitioning the National Highway Traffic Safety Administration to begin scrutinizing alleged problems with the totally integrated power module (TIPM) on about 24 Chrysler Group SUVs and minivans. The advocacy group claims that the part's failure can cause affected vehicles to stall or not start at all. NHTSA is still looking into the accusations and deciding whether a full investigation is actually warranted.
The CAS petition claims at least 70 TIPM failures, but according to NHTSA, six of the complaints are for models that don't have the modules. In 34 of the reported cases, the vehicles refused to start, and in 17 of them the engine stalled. There were also two allegations of smoke and one of a fire. However, none of these affected airbag deployment or resulted in a crash.
This petition isn't the first TIPM-related problem for Chrysler Group. A recent report in the New York Times alleged that it found 240 complaints potentially related to the issue on NHTSA's website alone. In September, the automaker also recalled 230,760 examples worldwide (188,723 in the US) of the 2011 Jeep Grand Cherokee and Dodge Durango replace the fuel pump relay circuit inside of the TIPM-7 with one external to the unit. The original part could allegedly cause the models to stall without warning. Even earlier, the company also recalled about 80,000 examples of the Jeep Wrangler and Dodge Nitro in 2007 to have the module reprogrammed.

Project Trail Force Jeep Wrangler goes to SEMA, then to a lucky winner

Extreme Terrain is an aftermarket parts company focused on the Jeep Wrangler. Partly just because it's a really cool thing to do, and probably having something to do with Jeep's upcoming 75th anniversary, Extreme Terrain found some dance partners to help work up a special 2015 Wrangler Rubicon that it will show off at the Bantam Jeep Heritage Festival in Butler, PA, then at SEMA in November, where it will be given away. Extreme worked with Barricade Off-Road and Kevin Tetz from the Spike show Trucks! to build the Wrangler it calls Project Trail Force. There is more than $24,000 worth of aftermarket gear on it, starting with the Ripp centrifugal supercharger that pumps an additional 140 horsepower into the 3.6-liter V6. It's got a 3.5-inch lift kit from Rock Krawler, Dana 44 axles strung between 37-inch BFG tires, Barricade bumpers, a 9,500-pound winch, fender flares, rock sliders, a 50-inch LED light bar above the windshield, LED spotlights on the A-pillars, and seven-inch KC Hilites headlights. Rugged Ridge worked over the inside with upgrades like all-terrain floor and cargo liners, plus seat covers, and a new navigation system with a back-up camera. If you want to win it, you can enter the contest at Extreme Terrain once every week until Oct. 23. The winner gets flown to SEMA to have Kevin Tetz hand the keys over. If you just want to see it, you can head to PA for that heritage festival. The Project Trail Force will also lead a Jeep parade that could set a Guinness World Record. The press release below has a lot more info on the build. Good luck. EXTREMETERRAIN AND BARRICADE OFF-ROAD TO UNVEIL THEIR FULLY-BUILT 2015 JEEP WRANGLER AT BANTAM JEEP FESTIVAL ExtremeTerrain.com and Barricade Off-Road teamed up to build a $73,000+ 2015 Jeep Wrangler Rubicon to be given away to a lucky winner at the 2015 SEMA Show • Giveaway Link: http://www.extremeterrain.com/jeep-wrangler-project-trailforce-giveaway.html • Video: https://www.youtube.com/watch?v=jsO6fxVq6kI MALVERN, Pa. (June 12, 2015) – ExtremeTerrain, a leader in providing aftermarket Jeep Wrangler parts, along with rugged, enthusiast-driven Jeep Wrangler aftermarket armor and accessories manufacturer Barricade Off-Road, today unveiled a fully-built 2015 Jeep Wrangler Rubicon dubbed Project Trail Force at the Bantam Jeep Heritage Festival in Butler, PA.

2019 Jeep Renegade reveals front fascia details

Over the past few months, details of the new 2019 Jeep Renegade subcompact crossover SUV have been trickling out via spy shots. This latest batch show that the front fascia, specifically the front bumper, is getting a number of subtle changes. Among the more noticeable tweaks are the new side vents in the bumper. They've been given a triangular design. Besides offering a nice chunky look, they also encompass the turn signals. This is a cleaner, better integrated look than the current model, which just leaves those indicators in their own little spots in the bumper. The foglights have changed, too. They're now significantly larger, and sit farther inboard in the main grille in the bumper. Moving up in the fascia, we see that the Renegade is getting some new headlights. At least on this model, there's an LED daytime running light halo in the headlamps. It also has a horizontal insert that appears to house an LED headlight element just like that on the new Wrangler. We've seen other prototypes with conventional halogen reflector headlights like on the current model, and we expect they will continue to be used on lower-spec models. There aren't many other changes to see. The rear of the truck looks roughly the same, as do the flanks. From past prototypes, we know that it will continue to have a massive touchscreen option for the infotainment. There also may be a hybrid model. It could be a very mild electric-assist like that on the four-cylinder Wrangler and the V8 and V6 Ram 1500s, or it could be something more. We expect to see the new Renegade revealed by the end of the year at the earliest, and certainly by the end of the next auto show season. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery 2019 Jeep Renegade Spy Shots View 9 Photos Image Credit: KGP Photography Spy Photos Jeep Crossover SUV Off-Road Vehicles jeep renegade