2014 Jeep Cherokee Latitude on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Jeep delivers basketful of concepts for the Moab Easter Jeep Safari

It's Easter time, and that means it's time for the 52nd Annual Moab Easter Jeep Safari, held March 24 through April 1, where thousands of off-roaders crawl, scrape and scramble over the rugged trails of Moab, Utah. And that brings us to this year's colorful collection of Jeep concepts, custom-built by FCA for the occasion. Jeep Wagoneer Roadtrip View 7 Photos This year there are seven Easter treats — including one called Wagoneer and one called Jeepster. All are decked out in Mopar parts. (Mopar already has 200-plus parts and counting for the all-new 2018 Jeep Wrangler.) Here then, is this year's Easter pageant of Jeeps: Jeep 4SPEED This year's lightweight concept is meant to bolster off-road performance through extensive weight savings. It's powered by the all-new 2.0-liter turbocharged I-4 engine with an eight-speed automatic. Carbon fiber abounds — the stuff is used for the hood, fender flares and the rear tub, which also features aluminum perforated panels. It gets an "aggressively swept back" look via raked windshield, longer door openings and a custom cage. It's also 22 inches shorter with improved approach and departure angles, though the wheelbase remains unchanged. And it gets Dana 44 front and rear axles with a 4.10 gear ratio and 18-inch lightweight monoblock wheels with 35-inch tires. Inside, there's a custom instrument panel, custom seats and deleted back seats. Footwells are perforated aluminum. The 4SPEED is so much lighter than stock, it rides two inches higher. Jeep Sandstorm This one's inspired by Baja desert racers but can still be used as a daily driver. It gets an extreme-duty suspension system capable of both tasks. The front axle has been moved forward four inches and takes a heavy-duty longarm four-link suspension and track bar. The rear axle has been moved back two inches and gets a triangulated trailing arm four-link suspension. The longer wheelbase provides better high-speed stability. The front wheels — 39.5-inch tires on 17-inch beadlock wheels — get custom coilovers and bypass shocks that allow 14 inches of travel in front and 18 in back. It gets Baja styling cues such as a vented carbon fiber hood, vented high-clearance fender flares and a cage with lay-down spare tire carrier. There are no exterior door handles, and the rear doors have been chopped.

Build a Jeep Gladiator 392 next? The Hummer H3T Alpha blazed the trail

The 2021 Wrangler Rubicon 392 will combine the go-anywhere capability of a Jeep's iconic off-roader with the grunt of a V8 for the first time in decades. As cool as that is, we can't help but think Jeep is missing out on a huge opportunity to pair that 470-horsepower, 6.4-liter Hemi V8 with the Wrangler's pickup cousin, the Jeep Gladiator, in the form of a Mojave 392.  Autoblog took part in a media Q&A session with Jeep ahead of the Rubicon 392's announcement in which the company's product higher-ups said that there are currently no official plans to build a 392 variant of the Gladiator pickup. But whether or not Jeep has plans, it certainly has precedent, and from our perspective, a market.  Rewind to 2008, better known as one of the worst possible years to introduce a gas-guzzling, V8-powered pickup truck. Enter the 2009 Hummer H3T Alpha, the first variant of Hummer's midsize truck/SUV hybrid to be offered with a 5.3-liter V8. The 300-horsepower small-block was an upgrade to the sturdy but relatively uninspiring 3.7-liter inline-5 that the H3 lineup had inherited from its midsize pickup platform mates.  As our Jeremy Korzeniewski noted in the Rubicon 392's introductory piece, an open-top Jeep has not been offered with an optional V8 for as long as the "Wrangler" nameplate has existed. The last Jeep 4x4 to do so was still a CJ, or civilian Jeep, and the 304 cubic-inch engine came from American Motors Corporation. Incidentally, this generation of the Wrangler is also the first to be offered in a pickup variant. Cue the beard-stroking.  Now, frankly, it's not even remotely fair to compare the H3T's powertrain offerings to the decade-newer Gladiator's, but the Hummer actually boasts a few advantages over Jeep's modern pickup. While most of the Jeep's off-road specs give it an edge, the Gladiator doesn't come close to the H3T's 30.1-degree departure angle, for instance. And in more practical terms, the stubbier H3T has other maneuverability advantages. The Gladiator has 3" of wheelbase and 5" of overall length on the H3T, and a 22.4-foot turning radius to show for it. The Hummer's? Just 18.5'.