2001 Jeep Cherokee Sport Sport Utility 4-door 4.0l on 2040-cars

Auto blog

Jeep owner inadvertently receives 2018 Wrangler hood from scrapyard

After an apparent mix-up, FCA may be looking for a new scrapyard to which to send prototype parts. JLWranglerForums.com member Redrockjk recently purchased a used Wrangler hood from a yard near the FCA proving grounds. When he ordered it, he thought it was from a 2014 model, and while it looked very similar to his current hood, after installing he discovered something unusual. It was too long. From what we can see in the photos from JLWranglerForums.com, the leading edge of the hood sticks out roughly two inches from the top of the Wrangler's grille. The greater length is also clear when the hood is placed next to its likely predecessor. The receivers for the exposed latches are also too far forward to be used on a current Wrangler. Redrockjk also said there wasn't a VIN or a part number anywhere on the hood. As if those details weren't a big enough red flag, Redrockjk reported that the used parts supplier contacted him to ask for the hood back. We reached out to Jeep to see if they could confirm if this is a hood for the next-generation Wrangler. Unsurprisingly, the company had no comment at this time. Considering the details, and the proximity of the scrapyard to an FCA proving ground, there's a better than zero chance this is from a pre-production 2018 Wrangler sent to the yard to be scrapped. No word on whether the hood was aluminum, as has been rumored. Except for the length, the part fits pretty well on the current model. The hood vents present are also similar to those found on some current models. It's one more piece of evidence that the next Wrangler won't stray far from a proven formula. Related Video: Featured Gallery 2018 Jeep Wrangler Hood News Source: JLWranglerForums.comImage Credit: JLWranglerForums.com Spy Photos Jeep SUV Off-Road Vehicles forum wrangler forums

332,000 Jeep, Fiat and Alfa Romeo models recalled over faulty seat belt buckle sensors

Stellantis has recalled 332,000 Alfa Romeo, Jeep, and Fiat vehicles in the United States due to faulty seat belt sensors. Included in the recall are certain 2017-2024 Alfa Romeo Giulia and 2018-2025 Stelvio models along with 2019-2023 Fiat 500X, Jeep Renegade, and 2024 Fiat 500E models. According to documents posted by the National Highway Traffic Safety Administration, "A disrupted connector on the buckle switch hall effect may affect the conduction on the connectors of the seat wiring and buckle which may cause the front seat air bag to not perform as expected during a crash." In more simple terms, the sensor that tells the vehicle's onboard computer if an occupant's seat belt is buckled may fail. If this happens, an airbag may not inflate in the event of a crash as intended. As of June 26, 2024, Stellantis says it has identified 578 field reports in North America potentially related to this issue. "The remedy will be to replace the connector by directly wiring the sensor to the harness with a solder tube," according to documentation provided by Stellantis. All repairs will be made free of charge.

Jeep delivers basketful of concepts for the Moab Easter Jeep Safari

It's Easter time, and that means it's time for the 52nd Annual Moab Easter Jeep Safari, held March 24 through April 1, where thousands of off-roaders crawl, scrape and scramble over the rugged trails of Moab, Utah. And that brings us to this year's colorful collection of Jeep concepts, custom-built by FCA for the occasion. Jeep Wagoneer Roadtrip View 7 Photos This year there are seven Easter treats — including one called Wagoneer and one called Jeepster. All are decked out in Mopar parts. (Mopar already has 200-plus parts and counting for the all-new 2018 Jeep Wrangler.) Here then, is this year's Easter pageant of Jeeps: Jeep 4SPEED This year's lightweight concept is meant to bolster off-road performance through extensive weight savings. It's powered by the all-new 2.0-liter turbocharged I-4 engine with an eight-speed automatic. Carbon fiber abounds — the stuff is used for the hood, fender flares and the rear tub, which also features aluminum perforated panels. It gets an "aggressively swept back" look via raked windshield, longer door openings and a custom cage. It's also 22 inches shorter with improved approach and departure angles, though the wheelbase remains unchanged. And it gets Dana 44 front and rear axles with a 4.10 gear ratio and 18-inch lightweight monoblock wheels with 35-inch tires. Inside, there's a custom instrument panel, custom seats and deleted back seats. Footwells are perforated aluminum. The 4SPEED is so much lighter than stock, it rides two inches higher. Jeep Sandstorm This one's inspired by Baja desert racers but can still be used as a daily driver. It gets an extreme-duty suspension system capable of both tasks. The front axle has been moved forward four inches and takes a heavy-duty longarm four-link suspension and track bar. The rear axle has been moved back two inches and gets a triangulated trailing arm four-link suspension. The longer wheelbase provides better high-speed stability. The front wheels — 39.5-inch tires on 17-inch beadlock wheels — get custom coilovers and bypass shocks that allow 14 inches of travel in front and 18 in back. It gets Baja styling cues such as a vented carbon fiber hood, vented high-clearance fender flares and a cage with lay-down spare tire carrier. There are no exterior door handles, and the rear doors have been chopped.