1999 Jeep Cherokee Sport, Good Condition. on 2040-cars

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Stellantis expects to hit emissions target without Tesla's help

Franco-Italian carmaker Stellantis expects to achieve its European carbon dioxide (CO2) emissions targets this year without environmental credits bought from Tesla, its CEO said in an interview published on Tuesday. Stellantis was formed through the merger of France's PSA and Italy's FCA, which spent about 2 billion euros ($2.40 billion) to buy European and U.S. CO2 credits from electric vehicle maker Tesla over the 2019-2021 period. "With the electrical technology that PSA brought to Stellantis, we will autonomously meet carbon dioxide emission regulations as early as this year," Stellantis boss Carlos Tavares said in the interview with French weekly Le Point. "Thus, we will not need to call on European CO2 credits and FCA will no longer have to pool with Tesla or anyone." California-based Tesla earns credits for exceeding emissions and fuel economy standards and sells them to other automakers that fall short. European regulations require all car manufacturers to reduce CO2 emissions for private vehicles to an average of 95 grams per kilometer this year. A Stellantis spokesman said the company is in discussions with Tesla about the financial implications of the decision to stop the pooling agreement. "As a result of the combination of Groupe PSA and FCA, Stellantis will be in a position to achieve CO2 targets in Europe for 2021 without open passenger car pooling arrangements with other automakers," he added. Tesla's sales of environmental credits to rival automakers helped it to announce slightly better than expected first-quarter revenue this week. The next tightening of European regulations will soon be the subject of proposals from the European Commission. The 2030 target could be lowered to less than 43 grams/km. Related Video: Government/Legal Green Alfa Romeo Chrysler Dodge Fiat Jeep Maserati RAM Tesla Citroen Peugeot Emissions Stellantis

NHTSA investigating 630k Jeep Wranglers for possible airbag fault

The National Highway Traffic Safety Administration is opening a preliminary evaluation into a possible wiring problem on some 2007-2012 Jeep Wrangler models that could affect airbag deployment. The government agency has 221 complaints alleging that the airbag warning light is illuminating, and that could indicate that the safety devices might not deploy in a crash. If a recall is necessary, an estimated 630,000 vehicles could be affected. According to the documents from NHTSA (as a PDF here), a "faulty clockspring assembly in the driver side airbag electrical circuit" could be the culprit. Also, some of the affected Wranglers are showing a fault code that indicates the safety device wouldn't deploy in an accident. However at this time, there are no reports of injuries related to this potential problem. NHTSA's preliminary evaluations are simply meant to investigate and don't necessarily lead to a recall. This isn't the first time for a potential problem like this on the Wrangler, though. A clockspring issue already led to a safety campaign for 2008-2012 right-hand drive Wranglers and an extended warranty for 2007 left-hand drive examples. Related Video: INVESTIGATION Subject : Air Bag Clockspring Wiring Failure Date Investigation Opened: JUN 19, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15025 Component(s): AIR BAGS All Products Associated with this Investigation Vehicle Make Model Model Year(s) JEEP WRANGLER 2007-2012 JEEP WRANGLER 2-DR 4X4 2007-2009 JEEP WRANGLER 4-DR 4X2 2007-2009 JEEP WRANGLER 4-DR 4X4 2007-2009 JEEP WRANGLER SAHARA 2007 Details Manufacturer: Chrysler (FCA US LLC) SUMMARY: The subject vehicles display an airbag warning light that may indicate a failure of the clockspring wiring in the driver side air bag circuit. Several complaints cite the following diagnostic trouble code (DTC): Code B1B02 Open Squib to driver's air bag. This DTC would indicate a no-fire condition (disablement) for the driver air bag. ODI investigated the RHD (right hand drive) Wrangler for a clockspring issue under PE11-019 which led to NHTSA Recall 11V258 on model year (MY) 2008-2012 RHD Wranglers as well as an extended warranty campaign on MY 2007 LHD Wrangler vehicles. This investigation covers the MY07-12 LHD (left hand drive) Wranglers.