1999 Jeep Cherokee Sport on 2040-cars

Auto blog

Updated 2014 Jeep Grand Cherokee ace same controversial moose test it failed in 2012 [w/video]

Some background: one of the more scandalous international incidents of he-said/he-said from 2012 was when Swedish magazine Teknikens Varld put the Jeep Grand Cherokee through its "moose (or elk) test" and reported that the SUV nearly rolled over. That lead to a whole lot of accusations and rebuttals: more than one website and Chrysler's own blog reported that the Jeep was overloaded; Chrysler said Teknikens printed the magazine then let Chrysler respond, Teknikens answered all of the charges in a lengthy post and said Chrysler was given a chance to comment before it went to print; when Chrysler sent investigators to oversee the test and the Jeep didn't go up on two wheels as it did in the first test, furthermore all four wheels stayed on the ground when Auto Motor und Sport tested a Grand Cherokee in the same way.
Teknikens then re-ran the test with a new vehicle and said it's been doing this test since the 1970s, uses the loading information that Chrysler provides to the Swedish motor authority and the previous Grand Cherokee passed with no problem. In the second test, the Jeep failed again, then it gave Chrysler engineers access to the car's electronics and ran the test again. In that second round the Grand Cherokee didn't repeat the lurid two-wheel action, but in eleven runs it blew out front left tire seven times. Chrysler still objects to the results of all of those tests and maintains that vehicle was safe.
The 2014 Grand Cherokee was given its shot at the gauntlet in the latest round of moose tests, and Teknikens Varld reports that it passed without any problem at all, its stability control working perfectly, controlling motion at low speeds and all the way up to 44.1 miles per hour. You can watch the video of the new test and read the press release from the magazine on the updated Grand Cherokee below.

Watch a Jeep CJ get disassembled and reassembled in minutes

Movie buffs! Remember the scene in the James Bond film 007: The Living Daylights where Timothy Dalton's character slices the floorpan off a police Lada using a laser, and when the driver hits the brakes the Lada's body simply jumps off its axles? That scene was immediately brought to mind as I watched this clip of eight Canadian mechanics disassembling a slightly modified Jeep in a matter of seconds. Having driven the Jeep to a complete stop, the technicians start unbolting it until the body lifts off the frame and the engine can be hauled away. It only took half a minute to turn the Jeep into just a chassis on wheels. As repair manuals say, refitting is the reversal of removal. Apparently the technicians have now honed their mechanical choreography to the point that the Jeep can be disassembled and reassembled in two minutes and 39 seconds; while I expect a great number of bolts having been removed beforehand and the likelihood of the Jeep falling to pieces with a sharp braking being significant, it is definitely impressive. It also reminds me of someone driving an old, dodgy car, having learned all its kinks to be able to keep it running. According to a Reddit thread, the pre-modified "Jifty Jeep" has been built (and taken apart, and rebuilt) by the School of Royal Canadian Electrical and Mechanical Engineers (RCEME) for exactly this purpose. The team travels all around Canada to practice their show, trying to shave seconds off their record. There are worse hobbies.

FCA inline-six rumored to be real, headed for Jeep Wagoneer

In September, Allpar reported that that clues being dropped at Fiat- Chrysler headquarters, in the carmaker's factories, and on engineer resumes pointed to the development of an inline six-cylinder engine. The site has just proclaimed the rumor is reality, writing that the straight-six, "turbocharged to meet or beat 5.7 Hemi power ratings, with a smoother torque curve, is on the way." The motor's first outing is expected to be either the next-generation Jeep Grand Cherokee, debuting perhaps next year, or the Jeep Wagoneer, debuting in 2020 or 2021. "Tornado" is the purported codename for the power plant said to be just under three liters in displacement, expanding the family begun with the Global Medium Engine 2.0-liter turbo codenamed Hurricane. Engine bay constraints and a long use horizon mean engineers won't simply add two more cylinders to the GME, however. Allpar says the brief is to keep the Tornado GME-T6 — the alphanumeric for "turbocharged six" — no more than three inches longer than the Tigershark 2.4-liter four-cylinder. That means "major design changes" that could include a space-saving head, more closely spaced cylinders, and no cylinder liners. An FCA division called Comau could be called on for its "SmartSpray" plasma lining technology. Allpar muses that the standard version of the engine for Chrysler, Dodge, Jeep, and Ram could get a single twin-scroll turbocharger. Performance trims for Alfa Romeo and Maserati could get different heads and maybe twin turbos, an SRT version might also get both those tweaks. History shows that the Italian versions would make changes to the block, as well. Even so, the Tornado would be less expensive than any Ferrari-supplied V6. A straight-six would put FCA in company with current adopters BMW and Mercedes-Benz, future users like Jaguar, and perhaps Aston Martin. The engine would span the widest range of use cases in the U.S. carmaker's portfolio, though. Potential applications include being a base engine for Ram trucks, serving double duty as a base engine and 5.7-liter Hemi replacement for the Dodge Charger and Challenger, working in the high-end Jeeps, and as a properly hot trim — with Ferrari-designed heads — in the luxury Italian sports cars. The Alfa Romeo Giulia begs for just such motivation to fill the gap between the 280-hp, $42,695 Ti Sport RWD and the 505-hp, $73,700 Giulia Quadrifoglio RWD. And a twin-turbo inline-six in a Maserati Alfieri would stack up nicely with the Germans.